81080M 1.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for LHD)
| *a | Component without harness connected (No. 1 Interior Illumination Light Assembly) |
Check the illumination.
Apply battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(I62)Location & Routingewd_type=routing;type=c;code=I62 |
|
| I62-2 (B) - Battery positive (+) I62-1 (L) - Battery negative (-) |
No. 1 interior illumination light assembly illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly.
81080M 2.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for RHD)
| *a | Component without harness connected (No. 1 Interior Illumination Light Assembly) |
Check the illumination.
Apply battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(I61)Location & Routingewd_type=routing;type=c;code=I61 |
|
| I61-2 (B) - Battery positive (+) I61-1 (L) - Battery negative (-) |
No. 1 interior illumination light assembly illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly.