81080L 1.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH
| *a | Component without harness connected (No. 1 Interior Illumination Light Assembly LH) |
Check the illumination.
Apply battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(i6)Location & Routingewd_type=routing;type=c;code=i6 Click Connector(i6)Seat>Front Seat Wire LH>Foot Light LH (No. 1 Interior Illumination Light Assembly LH)ewd_type=component;type=c;code=i6;pinno=2,1 |
|
| i6-2 - Battery positive (+) i6-1 - Battery negative (-) |
No. 1 interior illumination light assembly LH illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly LH.
81080P 2.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH
| *a | Component without harness connected (No. 1 Interior Illumination Light Assembly RH) |
Check the illumination.
Apply battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(h11)Location & Routingewd_type=routing;type=c;code=h11 Click Connector(h11)Seat>Front Seat Wire RH>Foot Light RH (No. 1 Interior Illumination Light Assembly RH)ewd_type=component;type=c;code=h11;pinno=2,1 |
|
| h11-2 - Battery positive (+) h11-1 - Battery negative (-) |
No. 1 interior illumination light assembly RH illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly RH.