67914B 1.INSPECT FRONT DOOR SCUFF PLATE LH
| *a | Component without harness connected (Front Door Scuff Plate LH) |
Check the illumination.
Apply battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(S32)Location & Routingewd_type=routing;type=c;code=S32 Click Connector(S32)Body>No. 2 Floor Wire / Step Rear Floor Wire LH>Option Connector (Scuff Plate Illumination LH)ewd_type=component;type=c;code=S32;pinno=1,2 |
|
| S32-1 (ILL+) - Battery positive (+) S32-2 (ILL-) - Battery negative (-) |
Front door scuff plate LH illuminates |
If the result is not as specified, replace the front door scuff plate LH.
67913B 2.INSPECT FRONT DOOR SCUFF PLATE RH
| *a | Component without harness connected (Front Door Scuff Plate RH) |
Check the illumination.
Apply battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(Q55)Location & Routingewd_type=routing;type=c;code=Q55 |
|
| Q55-1 (ILL+) - Battery positive (+) Q55-2 (ILL-) - Battery negative (-) |
Front door scuff plate RH illuminates |
If the result is not as specified, replace the front door scuff plate RH.