1.INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/o Front Camera)
Inspect the operation of the electrochromic inner rear view mirror assembly.
| *a | Black Colored Tape | *b | Forward Sensor |
| *c | Bright | *d | Dark |
| *e | Battery | *f | EC Switch |
| *g | Component without harness connected (Inner Rear View Mirror Assembly) |
- | - |
Connect a positive (+) lead from the battery to d22-1 (IG) and a negative (-) lead to d22-2 (E).
Press the EC switch.
Attach black colored tape to the forward sensor to prevent it from sensing.
Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(d22)Location & Routingewd_type=routing;type=c;code=d22 Click Connector(d22)Body>No. 1 Roof Wire>Inner Rear View Mirror Assemblyewd_type=component;type=c;code=d22;pinno=1,2 |
||
| d22-1 (IG) - Battery positive (+) d22-2 (E) - Battery negative (-) |
Light up the mirror with an electric light | Inner rear view mirror surface Bright → Dark |
If the result is not as specified, replace the inner rear view mirror assembly.
2.INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ Front Camera)
Inspect the operation of the electrochromic inner rear view mirror assembly.
| *a | Black Colored Tape | *b | Forward Sensor |
| *c | Bright | *d | Dark |
| *e | Battery | *f | EC Switch |
| *g | Component without harness connected (Inner Rear View Mirror Assembly) |
- | - |
Connect a positive (+) lead from the battery to d29-1 (IG) and a negative (-) lead to d29-2 (E).
Press the EC switch.
Attach black colored tape to the forward sensor to prevent it from sensing.
Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(d29)Location & Routingewd_type=routing;type=c;code=d29 Click Connector(d29)Body>No. 1 Roof Wire>Inner Rear View Mirror Assemblyewd_type=component;type=c;code=d29;pinno=1,2 |
||
| d29-1 (IG) - Battery positive (+) d29-2 (E) - Battery negative (-) |
Light up the mirror with an electric light | Inner rear view mirror surface Bright → Dark |
If the result is not as specified, replace the inner rear view mirror assembly.