Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY
RM38G0E _59 Vehicle Exterior _100649 LIGHTING (EXT) _0468040 HEADLIGHT ASSEMBLY A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY  REPAIR  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

·

If the installation area of the headlight assembly is damaged, use the supply retainer for low-cost repair.

·

Make sure that the headlight assembly is not damaged.



PROCEDURE

Hide 81194 1.INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH

a.
E485043C01
1.385,3.802 1.708,3.542 true 2.906,3.854 2.406,3.542 true 1.156,3.76 1.333,3.938 0.177,0.177 10 true *a 2.99,3.844 3.167,4.021 0.177,0.177 10 true *a
*a Boss


Cut off the blue-colored part in the illustration and sand smooth it with sandpaper.

NOTICE:

After cutting off the part, place the upper headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
E485044

Install the upper headlight protector retainer LH with the 2 screws.


Hide 81194B 2.INSTALL UPPER NO. 2 HEADLIGHT PROTECTOR RETAINER LH

a.
E485045C01
0.813,2.875 1.771,3.188 true 0.854,3.906 2.052,3.396 true 0.604,2.771 0.781,2.948 0.177,0.177 10 true *a 0.656,3.823 0.833,4 0.177,0.177 10 true *a
*a Boss


Cut off the blue-colored part in the illustration and sand smooth it with sandpaper.

NOTICE:

After cutting off the part, place the upper No. 2 headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



b.
E485046

Install the upper No. 2 headlight protector retainer LH with the 2 screws.


Hide 81196A 3.INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH

a.

w/ Headlight ECU:

i.
E485047C01
0.781,3.479 1.25,3.688 true 0.823,4.188 1.26,3.948 true 0.563,3.365 0.74,3.542 0.177,0.177 10 true *a 0.583,4.146 0.76,4.323 0.177,0.177 10 true *a
*a Boss


Cut off the blue-colored part in the illustration and sand smooth it with sandpaper.

NOTICE:

After cutting off the part, place the lower headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



ii.
E485048

Install the lower headlight protector retainer LH with the 2 screws.



b.

w/o Headlight ECU:

i.
E485069C01
0.688,3.125 1.354,3.344 true 1.938,4.01 1.177,4.292 true 0.49,3 0.667,3.177 0.177,0.177 10 true *a 0.958,4.198 1.135,4.375 0.177,0.177 10 true *a
*a Boss


Cut off the blue-colored part in the illustration and sand smooth it with sandpaper.

NOTICE:

After cutting off the part, place the lower headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



ii.
E485070

Install the lower headlight protector retainer LH with the 2 screws.



Hide 81196D 4.INSTALL LOWER NO. 2 HEADLIGHT PROTECTOR RETAINER LH

a.

w/ Headlight ECU:

i.
E485049C01
0,0 0,0 false
*a Boss


Cut off the blue-colored part in the illustration and sand smooth it with sandpaper.

NOTICE:

After cutting off the part, place the lower No. 2 headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



ii.
E485050

Install the lower No. 2 headlight protector retainer LH with the 2 screws.



b.

w/o Headlight ECU:

i.
E485071C01
0.969,0.271 1.781,0.427 true 0.99,0.917 2.01,0.708 true 0.771,0.167 0.948,0.344 0.177,0.177 10 true *a 0.76,0.844 0.938,1.021 0.177,0.177 10 true *a
*a Boss


Cut off the blue-colored part in the illustration and sand smooth it with sandpaper.

NOTICE:

After cutting off the part, place the lower No. 2 headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.



ii.
E485072

Install the lower No. 2 headlight protector retainer LH with the 2 screws.