| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | REAR COMBINATION LIGHT CORD LH | 81565D | - | - | - |
| 2 | REAR COMBINATION LIGHT PROTECTOR LH | 81568D | - | - | - |
| 3 | REAR TURN SIGNAL LIGHT BULB | 81550L | - | - | - |
| *A | Except Bulb Type Turn Signal Light | *B | for Bulb Type Turn Signal Light |
Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
81565D 1.REMOVE REAR COMBINATION LIGHT CORD LH
for Bulb Type Turn Signal Light
|
Remove in this Direction | - | - |
| *A | Except Bulb Type Turn Signal Light | *B | for Bulb Type Turn Signal Light |
|
Screw |
|
Connector |
81568J 2.REMOVE REAR COMBINATION LIGHT PROTECTOR LH
|
Remove in this Direction | - | - |
81550L 3.REMOVE REAR TURN SIGNAL LIGHT BULB (for Bulb Type Turn Signal Light)