812D0 1.INSPECT LICENSE PLATE LIGHT ASSEMBLY
| *a | Component without harness connected (License Plate Light Assembly) |
Check the illumination.
Apply battery voltage to the license plate light assembly and check that the light illuminates.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(g3)Location & Routingewd_type=routing;type=c;code=g3 Click Connector(g3)Body>No. 1 Rear Window Wire / No. 2 Back Door Wire>License Plate Light Assembly with Back Door Opener Switchewd_type=component;type=c;code=g3;pinno=2,1 |
|
| Battery positive (+) → Terminal g3-2(B) | License plate light assembly illuminates |
| Battery negative (-) → Terminal g3-1(E) | |
If the result is not as specified, replace the license plate light assembly.