84152 1.INSPECT HEADLIGHT LEVELING SWITCH
Check the headlight leveling switch.
| *a | Component without harness connected (Headlight Leveling Switch) |
Connect the positive (+) end of the battery to terminal I92-5(B) of the headlight leveling switch and the negative (-) end of the battery to terminal I92-2(E).
Measure the voltage between terminal I92-4(T) and terminal I92-2(E) according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
Click Location & Routing(I92)Location & Routingewd_type=routing;type=c;code=I92 |
||
| I92-4 (T) - I92-2 (E) | 0 | 0.8 to 1.6 V |
| 1 | 2.8 to 3.5 V | |
| 2 | 4.7 to 5.4 V | |
| 3 | 6.6 to 7.3 V | |
| 4 | 8.5 to 9.2 V | |
| 5 | 10.4 to 11.2 V | |
If the result is not as specified, replace the headlight leveling switch.
| *a | Component without harness connected (Headlight Leveling Switch) |
Check the illumination.
Apply battery voltage to the headlight leveling switch and check that the lights illuminate.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(I92)Location & Routingewd_type=routing;type=c;code=I92 |
|
| Battery positive (+) - Terminal I92-6(ILL+) Battery negative (-) - I92-1(ILL-) |
Headlight leveling switch illuminates |
If the result is not as specified, replace the headlight leveling switch.