Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE SHAFT
RM38G0E _52 Drivetrain _100455 AXLE AND DIFFERENTIAL _0468067 REAR AXLE SHAFT G

AXLE AND DIFFERENTIAL  REAR AXLE SHAFT  INSPECTION  


PROCEDURE

Hide 42312 1.INSPECT REAR AXLE SHAFT LH

a.
C179625

Using a dial indicator, measure the rear axle shaft runout and flange runout.

Maximum runout:
Shaft runout:

1.50 mm (0.0591 in.)

Flange runout:

0.05 mm (0.00197 in.)


If the rear axle shaft or flange is damaged or worn, or if the runout is more than the maximum, replace the rear axle shaft.