Home › Audio / Visual / Telematics › AUDIO / VIDEO › REAR DOOR SPEAKER
RM38G0E _56 Audio / Visual / Telematics _100606 AUDIO / VIDEO _0468146 REAR DOOR SPEAKER G

AUDIO / VIDEO  REAR DOOR SPEAKER  INSPECTION  


PROCEDURE

Hide 86160B 1.INSPECT REAR SPEAKER ASSEMBLY (for LH Side)

a.

With the speaker in the installed condition, check there are no abnormalities such looseness or rattling.


b.

Check that there is no foreign matter inside the speaker.


c.

Check that the speaker cone is not damaged.


d.
E199617C74
1.542,0.354 1.938,0.625 0.396,0.271 0.906,1.26 1.552,1.26 true 1.896,1.26 2.542,1.26 true 1.625,0.406 2.083,0.604 0.458,0.198 10 false P10 0.552,1.177 1.083,1.375 0.531,0.198 10 false WF+ 2.583,1.167 3.042,1.365 0.458,0.198 10 false WF- 0.042,0.042 0.417,0.281 0.375,0.24 12 false *a
*a Component without harness connected
(Rear Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

i.

for 14 Speakers:

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(P10)Location & Routing

Click Connector(P10)Body>No. 2 Rear Door Wire>Rear Speaker Assembly LH

P10-1 (WF-) - P10-2 (WF+) Always 3.3 to 4.9 Ω


If the result is not as specified, replace the rear speaker assembly.


ii.

for 10 Speakers:

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(P10)Location & Routing

Click Connector(P10)Body>No. 2 Rear Door Wire>Rear Speaker Assembly LH

P10-1 (WF-) - P10-2 (WF+) Always 4 Ω


If the result is not as specified, replace the rear speaker assembly.


iii.
E199617C81
1.542,0.354 1.938,0.625 0.396,0.271 0.906,1.26 1.552,1.26 true 1.896,1.26 2.542,1.26 true 1.656,0.406 2.115,0.604 0.458,0.198 10 false P9 0.573,1.177 1.104,1.375 0.531,0.198 10 false WF+ 2.615,1.156 3.073,1.354 0.458,0.198 10 false WF- 0.042,0.042 0.417,0.281 0.375,0.24 12 false *a
*a Component without harness connected
(Rear Speaker Assembly)


for 6 Speakers:

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(P9)Location & Routing

Click Connector(P9)Body>No. 2 Rear Door Wire>Rear Speaker Assembly LH

P9-1 (WF-) - P9-2 (WF+) Always 4 Ω


If the result is not as specified, replace the rear speaker assembly.



Hide 86160B 2.INSPECT REAR SPEAKER ASSEMBLY (for RH Side)

a.

With the speaker in the installed condition, check there are no abnormalities such looseness or rattling.


b.

Check that there is no foreign matter inside the speaker.


c.

Check that the speaker cone is not damaged.


d.
E199617C75
1.51,0.354 1.906,0.625 0.396,0.271 0.906,1.26 1.552,1.26 true 1.896,1.26 2.542,1.26 true 1.583,0.417 2.042,0.615 0.458,0.198 10 false O10 0.552,1.177 1.01,1.406 0.458,0.229 10 false WF+ 2.583,1.167 3.042,1.365 0.458,0.198 10 false WF- 0.042,0.042 0.417,0.281 0.375,0.24 12 false *a
*a Component without harness connected
(Rear Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

i.

for 14 Speakers:

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(O10)Location & Routing

Click Connector(O10)Body>No. 1 Rear Door Wire>Rear Speaker Assembly RH

O10-1 (WF-) - O10-2 (WF+) Always 3.3 to 4.9 Ω


If the result is not as specified, replace the rear speaker assembly.


ii.

for 10 Speakers:

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(O10)Location & Routing

Click Connector(O10)Body>No. 1 Rear Door Wire>Rear Speaker Assembly RH

O10-1 (WF-) - O10-2 (WF+) Always 4 Ω


If the result is not as specified, replace the rear speaker assembly.


iii.
E199617C83
1.542,0.354 1.938,0.625 0.396,0.271 0.906,1.26 1.552,1.26 true 1.896,1.26 2.542,1.26 true 1.646,0.406 2.104,0.604 0.458,0.198 10 false O9 0.573,1.177 1.104,1.375 0.531,0.198 10 false WF+ 2.615,1.156 3.073,1.354 0.458,0.198 10 false WF- 0.042,0.042 0.417,0.281 0.375,0.24 12 false *a
*a Component without harness connected
(Rear Speaker Assembly)


for 6 Speakers:

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(O9)Location & Routing

Click Connector(O9)Body>No. 1 Rear Door Wire>Rear Speaker Assembly RH

O9-1 (WF-) - O9-2 (WF+) Always 4 Ω


If the result is not as specified, replace the rear speaker assembly.



Hide 86160Y 3.INSPECT REAR NO. 2 SPEAKER ASSEMBLY (for 14 Speakers)

a.

With the speaker in the installed condition, check there are no abnormalities such looseness or rattling.


b.

Check that there is no foreign matter inside the speaker.


c.

Check that the speaker cone is not damaged.


d.

When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.

OK:

Malfunction disappears.


HINT:
·

When there is a possibility that either the right or left rear No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.

·

Perform the inspection above on both the LH and RH sides.