Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR (for Manual Seat)
RM38G0E _58 Vehicle Interior _100612 SEAT BELT _0468151 OCCUPANT DETECTION SENSOR(for Manual Seat) G

SEAT BELT  OCCUPANT DETECTION SENSOR(for Manual Seat)  INSPECTION  


PROCEDURE

Hide 71511A 1.INSPECT FRONT SEAT CUSHION PAD RH (OCCUPANT DETECTION SENSOR) (for LHD)

a.
B218574C58
0.115,0.104 0.427,0.302 0.313,0.198 10 false *a
*a Component without harness connected
(Front Seat Cushion Pad RH (Occupant Detection Sensor))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 Front passenger seat occupied Below 100 Ω
1 - 3 Front passenger seat not occupied 1 MΩ or higher


If the result is not as specified, replace the separate type front seat cushion pad RH (occupant detection sensor).


Hide 71512 2.INSPECT FRONT SEAT CUSHION PAD LH (OCCUPANT DETECTION SENSOR) (for RHD)

a.
B218574C58
0.115,0.104 0.427,0.302 0.313,0.198 10 false *a
*a Component without harness connected
(Front Seat Cushion Pad LH (Occupant Detection Sensor))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 Front passenger seat occupied Below 100 Ω
1 - 3 Front passenger seat not occupied 1 MΩ or higher


If the result is not as specified, replace the separate type front seat cushion pad LH (occupant detection sensor).