Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat)
RM38G0E _58 Vehicle Interior _100612 SEAT BELT _0468153 FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat) G

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat)  INSPECTION  


PROCEDURE

Hide 73204A 1.INSPECT FRONT SEAT BELT SET LH (for LHD)

a.

Measure the resistance according to the value(s) in the table below.

B610973C03
3.292,0.052 3.875,0.302 0.583,0.25 3.458,0.104 3.917,0.302 0.458,0.198 10 false S29 0.094,0.083 0.406,0.24 0.313,0.156 10 false *a
*a Component without harness connected
(Front Seat Belt Set LH)
- -


Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(S29)Location & Routing

Click Connector(S29)Seat>No. 2 Floor Wire>Front Seat Belt Set LH

S29-1 - S29-2 Seat belt unfastened Below 1 Ω
Seat belt fastened 10 kΩ or higher
S29-2 - S29-3 Seat belt unfastened 10 kΩ or higher
Seat belt fastened Below 1 Ω

If the result is not as specified, replace the front seat belt set LH.


Hide 73203 2.INSPECT FRONT SEAT BELT SET RH (for LHD)

a.

Measure the resistance according to the value(s) in the table below.

B607204C03
2.083,0.583 2.5,0.833 0.417,0.25 4.823,0.615 5.24,0.865 0.417,0.25 5,0.646 5.188,0.885 0.188,0.24 10 false A 2.167,0.635 2.625,0.833 0.458,0.198 10 false Q46 0.135,0.104 0.448,0.302 0.313,0.198 10 false *a
*a Component without harness connected
(Front Seat Belt Set RH)
- -


Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(Q46)Location & Routing

Click Connector(Q46)Seat>Floor Wire>Front Seat Belt Set RH

Q46-1 - Q46-2 Seat belt unfastened Below 1 Ω
Seat belt fastened 10 kΩ or higher
Q46-2 - Q46-3 Seat belt unfastened 10 kΩ or higher
Seat belt fastened Below 1 Ω
Q46-5 - A-3 Always Below 1 Ω
Q46-4 - A-1 Always Below 1 Ω

If the result is not as specified, replace the front seat belt set RH.


Hide 73203 3.INSPECT FRONT SEAT BELT SET RH (for RHD)

a.

Measure the resistance according to the value(s) in the table below.

B610973C04
3.375,0.042 3.792,0.292 0.417,0.25 3.438,0.073 3.896,0.271 0.458,0.198 10 false Q46 0.094,0.094 0.406,0.292 0.313,0.198 10 false *a
*a Component without harness connected
(Front Seat Belt Set RH)
- -


Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(Q46)Location & Routing

Click Connector(Q46)Seat>Floor Wire>Front Seat Belt Set RH

Q46-1 - Q46-2 Seat belt unfastened Below 1 Ω
Seat belt fastened 10 kΩ or higher
Q46-2 - Q46-3 Seat belt unfastened 10 kΩ or higher
Seat belt fastened Below 1 Ω

If the result is not as specified, replace the front seat belt set RH.


Hide 73204A 4.INSPECT FRONT SEAT BELT SET LH (for RHD)

a.

Measure the resistance according to the value(s) in the table below.

B607204C04
4.844,0.594 5.25,0.833 0.406,0.24 2.135,0.594 2.542,0.833 0.406,0.24 2.208,0.646 2.667,0.844 0.458,0.198 10 false S29 5,0.635 5.156,0.833 0.156,0.198 10 false A 0.083,0.115 0.396,0.313 0.313,0.198 10 false *a
*a Component without harness connected
(Front Seat Belt Set LH)
- -


Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(S29)Location & Routing

Click Connector(S29)Seat>No. 2 Floor Wire>Front Seat Belt Set LH

S29-1 - S29-2 Seat belt unfastened Below 1 Ω
Seat belt fastened 10 kΩ or higher
S29-2 - S29-3 Seat belt unfastened 10 kΩ or higher
Seat belt fastened Below 1 Ω
S29-5 - A-3 Always Below 1 Ω
S29-4 - A-1 Always Below 1 Ω


If the result is not as specified, replace the front seat belt set LH.