73390C 1.INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY LH
| *a | Component without harness connected (Rear No. 1 Seat Inner Belt Assembly LH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(k5)Location & Routingewd_type=routing;type=c;code=k5 Click Connector(k5)Seat>Rear Seat Wire LH>Rear No. 1 Seat Belt Assembly Inner LHewd_type=component;type=c;code=k5;pinno=1,2 |
||
| k5-1 - k5-2 | Seat belt fastened | 10 kΩ or higher |
| k5-1 - k5-2 | Seat belt unfastened | Below 1 Ω |
If the result is not as specified, replace the rear No. 1 seat inner belt assembly LH.