73590 1.INSPECT REAR NO. 2 SEAT INNER BELT ASSEMBLY LH (for LH Side)
| *a | Component without harness connected (Rear No. 2 Seat Inner Belt Assembly LH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(Q54)Location & Routingewd_type=routing;type=c;code=Q54 |
||
| Q54-1 (+) - Q54-2 (E) | Seat belt unfastened | Below 1 Ω |
| Q54-1 (+) - Q54-2 (E) | Seat belt fastened | 10 kΩ or higher |
If the result is not as specified, replace the rear No. 2 seat inner belt assembly LH.
73580A 2.INSPECT REAR NO. 2 SEAT INNER BELT ASSEMBLY (for RH Side)
| *a | Component without harness connected (Rear No. 2 Seat Inner Belt Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(Q53)Location & Routingewd_type=routing;type=c;code=Q53 |
||
| Q53-1 (+) - Q53-2 (E) | Seat belt unfastened | Below 1 Ω |
| Q53-1 (+) - Q53-2 (E) | Seat belt fastened | 10 kΩ or higher |
If the result is not as specified, replace the rear No. 2 seat inner belt assembly.