53450A 1.DISPOSE OF HOOD SUPPORT ASSEMBLY
Horizontally fix the hood support in a vise with the piston-rod pulled out.
Wear safety glasses. Gradually cut a part between A and B shown in the illustration using a metal saw to release the gas.
| Area | Specified Condition |
|---|---|
| a | 154 mm (6.06 in.) |
| b | 36 mm (1.42 in.) |
As metal debris may be blown outward by the gas, you must:
Wear protective glasses.
Cover the area being cut.
The gas inside the hood support is colorless, odorless and harmless. As there is a possibility that metal debris could scatter. Therefore, cover the hood support with a piece of cloth or other material.