84280D 1.INSPECT POWER BACK DOOR SENSOR ASSEMBLY LH
Check the resistance.
| *a | Component without harness connected (Power Back Door Sensor Assembly LH) |
| *b | Not Pressed |
| *c | Pressed |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(g8)Location & Routingewd_type=routing;type=c;code=g8 Click Connector(g8)Body>No. 1 Rear Window Wire / No. 2 Back Door Wire>Power Back Door Sensor Assembly LHewd_type=component;type=c;code=g8;pinno=1,2 |
||
| g8-1 (OSL) - g8-2 (OSLE) | Not pressed | 4465 to 4935 Ω |
| g8-1 (OSL) - g8-2 (OSLE) | Pressed | Below 500 Ω |
If the result is not as specified, replace the power back door sensor assembly LH.
84270G 2.INSPECT POWER BACK DOOR SENSOR ASSEMBLY RH
Check the resistance.
| *a | Component without harness connected (Power Back Door Sensor Assembly RH) |
| *b | Not Pressed |
| *c | Pressed |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(g7)Location & Routingewd_type=routing;type=c;code=g7 Click Connector(g7)Body>No. 1 Rear Window Wire / No. 2 Back Door Wire>Power Back Door Sensor Assembly RHewd_type=component;type=c;code=g7;pinno=1,2 |
||
| g7-1 (OSR) - g7-2 (OSRE) | Not pressed | 4465 to 4935 Ω |
| g7-1 (OSR) - g7-2 (OSRE) | Pressed | Below 500 Ω |
If the result is not as specified, replace the power back door sensor assembly RH.