72020A 1.INSPECT FRONT SEAT ADJUSTER ASSEMBLY LH (for LHD)
Check that the seat cushion moves smoothly when the battery is connected to the slide motor connector terminals.
| *a | Component without harness connected (Slide Motor (Front Seat Adjuster Assembly LH)) |
w/ Memory:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(i11)Location & Routingewd_type=routing;type=c;code=i11 Click Connector(i11)Seat>Front Seat Wire LH>Power Seat Slide Motor LH (Front Seat Adjuster Assembly LH)ewd_type=component;type=c;code=i11;pinno=4,1 |
|
| i11-4 - battery positive (+) i11-1 - battery negative (-) |
Forward |
| i11-1 - battery positive (+) i11-4 - battery negative (-) |
Backward |
If the result is not as specified, replace the front seat adjuster assembly LH.
| *a | Component without harness connected (Slide Motor (Front Seat Adjuster Assembly LH)) |
w/o Memory:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(i23)Location & Routingewd_type=routing;type=c;code=i23 Click Connector(i23)Seat>Front Seat Wire LH>Power Seat Slide Motor LH (Front Seat Adjuster Assembly LH)ewd_type=component;type=c;code=i23;pinno=2,1 |
|
| i23-2 - battery positive (+) i23-1 - battery negative (-) |
Forward |
| i23-1 - battery positive (+) i23-2 - battery negative (-) |
Backward |
If the result is not as specified, replace the front seat adjuster assembly LH.
Check that the front seat adjuster assembly LH moves smoothly when the battery is connected to the lifter motor connector terminals.
| *a | Component without harness connected (Lifter Motor (Front Seat Adjuster Assembly LH)) |
w/ Memory:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(i13)Location & Routingewd_type=routing;type=c;code=i13 Click Connector(i13)Seat>Front Seat Wire LH>Power Seat Lifter Motor LH (Front Seat Adjuster Assembly LH)ewd_type=component;type=c;code=i13;pinno=1,4 |
|
| i13-1 - battery positive (+) i13-4 - battery negative (-) |
Upward |
| i13-4 - battery positive (+) i13-1 - battery negative (-) |
Downward |
If the result is not as specified, replace the front seat adjuster assembly LH.
| *a | Component without harness connected (Lifter Motor (Front Seat Adjuster Assembly LH)) |
w/o Memory:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(i3)Location & Routingewd_type=routing;type=c;code=i3 Click Connector(i3)Seat>Front Seat Wire LH>Power Seat Lifter Motor LH (Front Seat Adjuster Assembly LH)ewd_type=component;type=c;code=i3;pinno=1,2 |
|
| i3-1 - battery positive (+) i3-2 - battery negative (-) |
Upward |
| i3-2 - battery positive (+) i3-1 - battery negative (-) |
Downward |
If the result is not as specified, replace the front seat adjuster assembly LH.
Check that the front seat adjuster assembly LH moves smoothly when the battery is connected to the tilt motor connector terminals.
| *a | Component without harness connected (Tilt Motor (Front Seat Adjuster Assembly LH)) |
w/ Memory:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(i12)Location & Routingewd_type=routing;type=c;code=i12 Click Connector(i12)Seat>Front Seat Wire LH>Power Seat Tilt Motor LH (Front Seat Adjuster Assembly LH)ewd_type=component;type=c;code=i12;pinno=1,4 |
|
| i12-1 - battery positive (+) i12-4 - battery negative (-) |
Upward |
| i12-4 - battery positive (+) i12-1 - battery negative (-) |
Downward |
If the result is not as specified, replace the front seat adjuster assembly LH.
| *a | Component without harness connected (Tilt Motor (Front Seat Adjuster Assembly LH)) |
w/o Memory:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(i2)Location & Routingewd_type=routing;type=c;code=i2 Click Connector(i2)Seat>Front Seat Wire LH>Power Seat Tilt Motor LH (Front Seat Adjuster Assembly LH)ewd_type=component;type=c;code=i2;pinno=1,2 |
|
| i2-1 - battery positive (+) i2-2 - battery negative (-) |
Upward |
| i2-1 - battery positive (+) i2-2 - battery negative (-) |
Downward |
If the result is not as specified, replace the front seat adjuster assembly LH.
72010A 2.INSPECT FRONT SEAT ADJUSTER ASSEMBLY RH (for RHD)
Check that the seat cushion moves smoothly when the battery is connected to the slide motor connector terminals.
| *a | Component without harness connected (Slide Motor (Front Seat Adjuster Assembly RH)) |
w/ Memory:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(h1)Location & Routingewd_type=routing;type=c;code=h1 Click Connector(h1)Seat>Front Seat Wire RH>Power Seat Slide Motor RH (Front Seat Adjuster Assembly RH)ewd_type=component;type=c;code=h1;pinno=4,1 |
|
| h1-4 - battery positive (+) h1-1 - battery negative (-) |
Forward |
| h1-1 - battery positive (+) h1-4 - battery negative (-) |
Backward |
If the result is not as specified, replace the front seat adjuster assembly RH.
| *a | Component without harness connected (Slide Motor (Front Seat Adjuster Assembly RH)) |
w/o Memory:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(h4)Location & Routingewd_type=routing;type=c;code=h4 Click Connector(h4)Seat>Front Seat Wire RH>Power Seat Slide Motor RH (Front Seat Adjuster Assembly RH)ewd_type=component;type=c;code=h4;pinno=2,1 |
|
| h4-2 - battery positive (+) h4-1 - battery negative (-) |
Forward |
| h4-1 - battery positive (+) h4-2 - battery negative (-) |
Backward |
If the result is not as specified, replace the front seat adjuster assembly RH.
Check that the front seat adjuster assembly RH moves smoothly when the battery is connected to the lifter motor connector terminals.
| *a | Component without harness connected (Lifter Motor (Front Seat Adjuster Assembly RH)) |
w/ Memory:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(h3)Location & Routingewd_type=routing;type=c;code=h3 Click Connector(h3)Seat>Front Seat Wire RH>Power Seat Lifter Motor RH (Front Seat Adjuster Assembly RH)ewd_type=component;type=c;code=h3;pinno=1,4 |
|
| h3-1 - battery positive (+) h3-4 - battery negative (-) |
Upward |
| h3-4 - battery positive (+) h3-1 - battery negative (-) |
Downward |
If the result is not as specified, replace the front seat adjuster assembly RH.
| *a | Component without harness connected (Lifter Motor (Front Seat Adjuster Assembly RH)) |
w/o Memory:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(h6)Location & Routingewd_type=routing;type=c;code=h6 Click Connector(h6)Seat>Front Seat Wire RH>Power Seat Lifter Motor RH (Front Seat Adjuster Assembly RH)ewd_type=component;type=c;code=h6;pinno=2,1 |
|
| h6-2 - battery positive (+) h6-1 - battery negative (-) |
Upward |
| h6-1 - battery positive (+) h6-2 - battery negative (-) |
Downward |
If the result is not as specified, replace the front seat adjuster assembly RH.
Check that the front seat adjuster assembly RH moves smoothly when the battery is connected to the tilt motor connector terminals.
| *a | Component without harness connected (Tilt Motor (Front Seat Adjuster Assembly RH)) |
w/ Memory:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(h2)Location & Routingewd_type=routing;type=c;code=h2 Click Connector(h2)Seat>Front Seat Wire RH>Power Seat Tilt Motor RH (Front Seat Adjuster Assembly RH)ewd_type=component;type=c;code=h2;pinno=1,4 |
|
| h2-1 - battery positive (+) h2-4 - battery negative (-) |
Upward |
| h2-4 - battery positive (+) h2-1 - battery negative (-) |
Downward |
If the result is not as specified, replace the front seat adjuster assembly RH.
| *a | Component without harness connected (Tilt Motor (Front Seat Adjuster Assembly RH)) |
w/o Memory:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(h5)Location & Routingewd_type=routing;type=c;code=h5 Click Connector(h5)Seat>Front Seat Wire RH>Power Seat Tilt Motor RH (Front Seat Adjuster Assembly RH)ewd_type=component;type=c;code=h5;pinno=1,2 |
|
| h5-1 - battery positive (+) h5-2 - battery negative (-) |
Upward |
| h5-2 - battery positive (+) h5-1 - battery negative (-) |
Downward |
If the result is not as specified, replace the front seat adjuster assembly RH.
72010A 3.INSPECT FRONT SEAT ADJUSTER ASSEMBLY RH (for LHD)
| *a | Component without harness connected (Slide Motor (Front Seat Adjuster Assembly RH)) |
Check that the front seat adjuster assembly RH moves smoothly when the battery is connected to the slide motor connector terminals.
w/ Rear Seat Entertainment System:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(h4)Location & Routingewd_type=routing;type=c;code=h4 Click Connector(h4)Seat>Front Seat Wire RH>Power Seat Slide Motor RH (Front Seat Adjuster Assembly RH)ewd_type=component;type=c;code=h4;pinno=2,1 |
|
| h4-2 - battery positive (+) h4-1 - battery negative (-) |
Forward |
| h4-1 - battery positive (+) h4-2 - battery negative (-) |
Backward |
If the result is not as specified, replace the front seat adjuster assembly RH.
| *a | Component without harness connected (Slide Motor (Front Seat Adjuster Assembly RH)) |
w/o Rear Seat Entertainment System:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(h25)Location & Routingewd_type=routing;type=c;code=h25 Click Connector(h25)Seat>Front Seat Wire RH>Power Seat Slide Motor RH (Front Seat Adjuster Assembly RH)ewd_type=component;type=c;code=h25;pinno=2,1 |
|
| h25-2 - battery positive (+) h25-1 - battery negative (-) |
Forward |
| h25-1 - battery positive (+) h25-2 - battery negative (-) |
Backward |
If the result is not as specified, replace the front seat adjuster assembly RH.
| *a | Component without harness connected (Lifter Motor (Front Seat Adjuster Assembly RH)) |
Check that the front seat adjuster assembly RH moves smoothly when the battery is connected to the lifter motor connector terminals.
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(h6)Location & Routingewd_type=routing;type=c;code=h6 Click Connector(h6)Seat>Front Seat Wire RH>Power Seat Lifter Motor RH (Front Seat Adjuster Assembly RH)ewd_type=component;type=c;code=h6;pinno=1,2 |
|
| h6-1 - battery positive (+) h6-2 - battery negative (-) |
Upward |
| h6-2 - battery positive (+) h6-1 - battery negative (-) |
Downward |
If the result is not as specified, replace the front seat adjuster assembly RH.
| *a | Component without harness connected (Tilt Motor (Front Seat Adjuster Assembly RH)) |
Check that the front seat adjuster assembly RH moves smoothly when the battery is connected to the tilt motor connector terminals.
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(h5)Location & Routingewd_type=routing;type=c;code=h5 Click Connector(h5)Seat>Front Seat Wire RH>Power Seat Tilt Motor RH (Front Seat Adjuster Assembly RH)ewd_type=component;type=c;code=h5;pinno=1,2 |
|
| h5-1 - battery positive (+) h5-2 - battery negative (-) |
Upward |
| h5-2 - battery positive (+) h5-1 - battery negative (-) |
Downward |
If the result is not as specified, replace the front seat adjuster assembly RH.
72020A 4.INSPECT FRONT SEAT ADJUSTER ASSEMBLY LH (for RHD)
| *a | Component without harness connected (Slide Motor (Front Seat Adjuster Assembly LH)) |
Check that the front seat adjuster assembly LH moves smoothly when the battery is connected to the slide motor connector terminals.
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(i1)Location & Routingewd_type=routing;type=c;code=i1 Click Connector(i1)Seat>Front Seat Wire LH>Power Seat Slide Motor LH (Front Seat Adjuster Assembly LH)ewd_type=component;type=c;code=i1;pinno=2,1 |
|
| i1-2 - battery positive (+) i1-1 - battery negative (-) |
Forward |
| i1-1 - battery positive (+) i1-2 - battery negative (-) |
Backward |
If the result is not as specified, replace the front seat adjuster assembly LH.
| *a | Component without harness connected (Lifter Motor (Front Seat Adjuster Assembly LH)) |
Check that the front seat adjuster assembly LH moves smoothly when the battery is connected to the lifter motor connector terminals.
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(i3)Location & Routingewd_type=routing;type=c;code=i3 Click Connector(i3)Seat>Front Seat Wire LH>Power Seat Lifter Motor LH (Front Seat Adjuster Assembly LH)ewd_type=component;type=c;code=i3;pinno=1,2 |
|
| i3-1 - battery positive (+) i3-2 - battery negative (-) |
Upward |
| i3-2 - battery positive (+) i3-1 - battery negative (-) |
Downward |
If the result is not as specified, replace the front seat adjuster assembly LH.
| *a | Component without harness connected (Tilt Motor (Front Seat Adjuster Assembly LH)) |
Check that the front seat adjuster assembly LH moves smoothly when the battery is connected to the tilt motor connector terminals.
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(i2)Location & Routingewd_type=routing;type=c;code=i2 Click Connector(i2)Seat>Front Seat Wire LH>Power Seat Tilt Motor LH (Front Seat Adjuster Assembly LH)ewd_type=component;type=c;code=i2;pinno=1,2 |
|
| i2-1 - battery positive (+) i2-2 - battery negative (-) |
Upward |
| i2-2 - battery positive (+) i2-1 - battery negative (-) |
Downward |
If the result is not as specified, replace the front seat adjuster assembly LH.
71014 5.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY LH (for LHD)
Check that the front seatback frame sub-assembly LH moves smoothly when the battery is connected to the reclining motor connector terminals.
| *a | Component without harness connected (Reclining Motor (Front Seatback Sub-assembly LH)) |
Type A:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(p3)Location & Routingewd_type=routing;type=c;code=p3 Click Connector(p3)Seat>No. 2 Front Seat Wire LH>Front Power Seat Reclining Motor LHewd_type=component;type=c;code=p3;pinno=4,1 |
|
| p3-4 - battery positive (+) p3-1 - battery negative (-) |
Forward |
| p3-1 - battery positive (+) p3-4 - battery negative (-) |
Backward |
If the result is not as specified, replace the front seatback frame sub-assembly LH.
| *a | Component without harness connected (Reclining Motor (Front Seatback Sub-assembly LH)) |
Type B:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(p1)Location & Routingewd_type=routing;type=c;code=p1 Click Connector(p1)Seat>No. 2 Front Seat Wire LH>Front Power Seat Reclining Motor LHewd_type=component;type=c;code=p1;pinno=2,1 |
|
| p1-2 - battery positive (+) p1-1 - battery negative (-) |
Forward |
| p1-1 - battery positive (+) p1-2 - battery negative (-) |
Backward |
If the result is not as specified, replace the front seatback frame sub-assembly LH.
71013A 6.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY RH (for RHD)
Check that the front seatback frame sub-assembly RH moves smoothly when the battery is connected to the reclining motor connector terminals.
| *a | Component without harness connected (Reclining Motor (Front Seatback Frame Sub-assembly RH)) |
Type A:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(o4)Location & Routingewd_type=routing;type=c;code=o4 Click Connector(o4)Seat>No. 2 Front Seat Wire RH>Front Power Seat Reclining Motor RHewd_type=component;type=c;code=o4;pinno=4,1 |
|
| o4-4 - battery positive (+) o4-1 - battery negative (-) |
Forward |
| o4-1 - battery positive (+) o4-4 - battery negative (-) |
Backward |
If the result is not as specified, replace the front seatback frame sub-assembly RH.
| *a | Component without harness connected (Reclining Motor (Front Seatback Frame Sub-assembly RH)) |
Type B:
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(o2)Location & Routingewd_type=routing;type=c;code=o2 Click Connector(o2)Seat>No. 2 Front Seat Wire RH>Front Power Seat Reclining Motor RHewd_type=component;type=c;code=o2;pinno=2,1 |
|
| o2-2 - battery positive (+) o2-1 - battery negative (-) |
Forward |
| o2-1 - battery positive (+) o2-2 - battery negative (-) |
Backward |
If the result is not as specified, replace the front seatback frame sub-assembly RH.
71013A 7.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY RH (for LHD)
| *a | Component without harness connected (Reclining Motor (Front Seatback Sub-assembly RH)) |
Check that the front seatback sub-assembly RH moves smoothly when the battery is connected to the reclining motor connector terminals.
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(o2)Location & Routingewd_type=routing;type=c;code=o2 Click Connector(o2)Seat>No. 2 Front Seat Wire RH>Front Power Seat Reclining Motor RHewd_type=component;type=c;code=o2;pinno=2,1 |
|
| o2-2 - battery positive (+) o2-1 - battery negative (-) |
Forward |
| o2-1 - battery positive (+) o2-2 - battery negative (-) |
Backward |
If the result is not as specified, replace the front seatback frame sub-assembly RH.
71014 8.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY LH (for RHD)
| *a | Component without harness connected (Reclining Motor (Front Seatback Sub-assembly LH)) |
Check that the front seatback sub-assembly LH moves smoothly when the battery is connected to the reclining motor connector terminals.
| Tester Connection | Operational Direction |
|---|---|
Click Location & Routing(p1)Location & Routingewd_type=routing;type=c;code=p1 Click Connector(p1)Seat>No. 2 Front Seat Wire LH>Front Power Seat Reclining Motor LHewd_type=component;type=c;code=p1;pinno=2,1 |
|
| p1-2 - battery positive (+) p1-1 - battery negative (-) |
Forward |
| p1-1 - battery positive (+) p1-2 - battery negative (-) |
Backward |
If the result is not as specified, replace the front seatback frame sub-assembly LH.