84927 1.INSPECT SEAT MEMORY SWITCH (for LHD)
| *a | Switch 1 |
| *b | Switch 2 |
| *c | Switch 3 |
| *d | SET Switch |
| *e | Component without wire harness connected (Seat Memory Switch) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
Click Location & Routing(N20)Location & Routingewd_type=routing;type=c;code=N20 Click Connector(N20)Body>Front Door Wire LH>Seat Memory Switch LHewd_type=component;type=c;code=N20;pinno=1,5,2,3,4 |
||
| N20-1 (M1) - N20-5 (E) | Switch 1 pressed | Below 1 Ω |
| N20-2 (M2) - N20-5 (E) | Switch 2 pressed | |
| N20-3 (M3) - N20-5 (E) | Switch 3 pressed | |
| N20-4 (MRY) - N20-5 (E) | SET switch pressed | |
If the result is not as specified, replace the seat memory switch.
84927 2.INSPECT SEAT MEMORY SWITCH (for RHD)
| *a | Switch 1 |
| *b | Switch 2 |
| *c | Switch 3 |
| *d | SET Switch |
| *e | Component without wire harness connected (Seat Memory Switch) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
Click Location & Routing(M8)Location & Routingewd_type=routing;type=c;code=M8 Click Connector(M8)Body>Front Door Wire RH>Seat Memory Switch RHewd_type=component;type=c;code=M8;pinno=5,1,4,3,2 |
||
| M8-5 (M1) - M8-1 (E) | Switch 1 pressed | Below 1 Ω |
| M8-4 (M2) - M8-1 (E) | Switch 2 pressed | |
| M8-3 (M3) - M8-1 (E) | Switch 3 pressed | |
| M8-2 (MRY) - M8-1 (E) | SET switch pressed | |
If the result is not as specified, replace the seat memory switch.