87511D 1.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH (for LHD)
| *a | Component without harness connected (Front Seat Cushion Heater Assembly LH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(i5)Location & Routingewd_type=routing;type=c;code=i5 Click Connector(i5)Seat>Front Seat Wire LH>Front Seat Cushion Heater LH (Front Seat Cushion Pad LH)ewd_type=component;type=c;code=i5;pinno=2,6,1,4,5 |
||
| i5-2 - A-2 | Always 20°C (68°F) | Below 1 Ω |
| i5-2 - i5-6 | Always 20°C (68°F) | Below 1 Ω |
| i5-1 - i5-2 | Always 20°C (68°F) | 2.87 to 3.43 Ω |
| i5-2 - A-1 | Always 20°C (68°F) | 2.95 to 3.53 Ω |
| i5-4 - i5-5 | Always 20°C (68°F) | 9.88 to 10.13 kΩ |
If the result is not as specified, replace the front seat cushion heater assembly LH.
87511C 2.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH (for LHD)
| *a | Component without harness connected (Front Seat Cushion Heater Assembly RH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(h9)Location & Routingewd_type=routing;type=c;code=h9 Click Connector(h9)Seat>Front Seat Wire RH>Front Seat Cushion Heater RH (Front Seat Cushion Pad RH)ewd_type=component;type=c;code=h9;pinno=2,6,1,4,5 |
||
| h9-2 - A-2 | Always 20°C (68°F) | Below 1 Ω |
| h9-2 - h9-6 | Always 20°C (68°F) | Below 1 Ω |
| h9-1 - h9-2 | Always 20°C (68°F) | 2.87 to 3.43 Ω |
| h9-2 - A-1 | Always 20°C (68°F) | 2.95 to 3.53 Ω |
| h9-4 - h9-5 | Always 20°C (68°F) | 9.88 to 10.13 kΩ |
If the result is not as specified, replace the front seat cushion heater assembly RH.
87511C 3.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH (for RHD)
| *a | Component without harness connected (Front Seat Cushion Heater Assembly RH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(h9)Location & Routingewd_type=routing;type=c;code=h9 Click Connector(h9)Seat>Front Seat Wire RH>Front Seat Cushion Heater RH (Front Seat Cushion Pad RH)ewd_type=component;type=c;code=h9;pinno=2,6,1,4,5 |
||
| h9-2 - A-2 | Always 20°C (68°F) | Below 1 Ω |
| h9-2 - h9-6 | Always 20°C (68°F) | Below 1 Ω |
| h9-2 - h9-1 | Always 20°C (68°F) | 2.87 to 3.43 Ω |
| h9-2 - A-1 | Always 20°C (68°F) | 2.95 to 3.53 Ω |
| h9-4 - h9-5 | Always 20°C (68°F) | 9.88 to 10.13 kΩ |
If the result is not as specified, replace the front seat cushion heater assembly RH.
87511D 4.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH (for RHD)
| *a | Component without harness connected (Front Seat Cushion Heater Assembly LH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(i5)Location & Routingewd_type=routing;type=c;code=i5 Click Connector(i5)Seat>Front Seat Wire LH>Front Seat Cushion Heater LH (Front Seat Cushion Pad LH)ewd_type=component;type=c;code=i5;pinno=2,6,1,4,5 |
||
| i5-2 - A-2 | Always 20°C (68°F) | Below 1 Ω |
| i5-2 - i5-6 | Always 20°C (68°F) | Below 1 Ω |
| i5-1 - i5-2 | Always 20°C (68°F) | 2.87 to 3.43 Ω |
| i5-2 - A-1 | Always 20°C (68°F) | 2.95 to 3.53 Ω |
| i5-4 - i5-5 | Always 20°C (68°F) | 9.88 to 10.13 kΩ |
If the result is not as specified, replace the front seat cushion heater assembly LH.