87530A 1.INSPECT REAR NO. 1 SEATBACK HEATER ASSEMBLY RH
| *a | Component without harness connected (Rear No. 1 Seatback Heater Assembly RH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(j8)Location & Routingewd_type=routing;type=c;code=j8 Click Connector(j8)Seat>Rear Seat Wire RH>Rear Seat Back Heater RH (No. 1 Seat Back Pad RH)ewd_type=component;type=c;code=j8;pinno=1,2 |
||
| j8-1 - j8-2 | Always 20°C (68°F) | 3.78 to 4.52 Ω |
If the result is not as specified, replace the rear No. 1 seatback heater assembly RH.