87530 1.INSPECT REAR NO. 1 SEATBACK HEATER ASSEMBLY LH
| *a | Component without harness connected (Rear No. 1 Seatback Heater Assembly LH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(k6)Location & Routingewd_type=routing;type=c;code=k6 Click Connector(k6)Seat>Rear Seat Wire LH>Rear Seat Back Heater LH (No. 1 Seat Back Pad LH)ewd_type=component;type=c;code=k6;pinno=1,2 |
||
| k6-1 - k6-2 | Always 20°C (68°F) | 3.78 to 4.52 Ω |
If the result is not as specified, replace the rear No. 1 seatback heater assembly LH.