79204C 1.INSPECT NO. 2 SEATBACK FRAME SUB-ASSEMBLY LH
| *a | Component without harness connected (No. 2 Seatback Frame Sub-assembly LH) |
Check that the seatback moves smoothly when the battery is connected to the reclining motor connector terminals.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(n1)Location & Routingewd_type=routing;type=c;code=n1 Click Connector(n1)Body>No. 2 Rear Seat Wire LH>Rear Power Seat Reclining Motor LHewd_type=component;type=c;code=n1;pinno=4,1 |
|
| n1-4 - battery positive (+) n1-1 - battery negative (-) |
Forward |
| n1-1 - battery positive (+) n1-4 - battery negative (-) |
Backward |
If the result is not as specified, replace the No. 2 seatback frame sub-assembly LH.
79203B 2.INSPECT NO. 2 SEATBACK FRAME SUB-ASSEMBLY RH
| *a | Component without harness connected (No. 2 Seatback Frame Sub-assembly RH) |
Check that the seatback moves smoothly when the battery is connected to the reclining motor connector terminals.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(m1)Location & Routingewd_type=routing;type=c;code=m1 Click Connector(m1)Body>No. 2 Rear Seat Wire RH>Rear Power Seat Reclining Motor RHewd_type=component;type=c;code=m1;pinno=4,1 |
|
| m1-4 - battery positive (+) m1-1 - battery negative (-) |
Forward |
| m1-1 - battery positive (+) m1-4 - battery negative (-) |
Backward |
If the result is not as specified, replace the No. 2 seatback frame sub-assembly RH.
79040C 3.INSPECT REAR NO. 2 SEAT LEG ASSEMBLY LH
| *a | Component without harness connected (Rear No. 2 Seat Leg Assembly LH) |
Check that the seat cushion moves smoothly when the battery is connected to the slide motor connector terminals.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(n2)Location & Routingewd_type=routing;type=c;code=n2 Click Connector(n2)Body>No. 2 Rear Seat Wire LH>Rear Power Seat Slide Motor LHewd_type=component;type=c;code=n2;pinno=4,1 |
|
| n2-4 - battery positive (+) n2-1 - battery negative (-) |
Fold |
| n2-1 - battery positive (+) n2-4 - battery negative (-) |
Return |
If the result is not as specified, replace the rear No. 2 seat leg assembly LH.
79030C 4.INSPECT REAR NO. 2 SEAT LEG ASSEMBLY RH
| *a | Component without harness connected (Rear No. 2 Seat Leg Assembly RH) |
Check that the seat cushion moves smoothly when the battery is connected to the slide motor connector terminals.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(m2)Location & Routingewd_type=routing;type=c;code=m2 Click Connector(m2)Body>No. 2 Rear Seat Wire RH>Rear Power Seat Slide Motor RHewd_type=component;type=c;code=m2;pinno=4,1 |
|
| m2-4 - battery positive (+) m2-1 - battery negative (-) |
Fold |
| m2-1 - battery positive (+) m2-4 - battery negative (-) |
Return |
If the result is not as specified, replace the rear No. 2 seat leg assembly RH.