Home › Steering › STEERING COLUMN › POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
RM38G0E _55 Steering _100923 STEERING COLUMN _0468603 POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM U

STEERING COLUMN  POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM  FAIL-SAFE CHART  


HINT:

If the power source voltage to the multiplex tilt and telescopic ECU returns to normal within 10 seconds during tilt or telescopic operation, the operation will be resumed. If it returns to normal after 10 seconds have elapsed, the operation restarts when a tilt or telescopic operation signal is sent to the multiplex tilt and telescopic ECU again.


Fail-safe Operation
DTC No. Detection Item Fail-safe Operation
B26031C Tilt and Telescopic Manual Switch Circuit Circuit Voltage Out of Range The tilt and telescopic operation using the switch is suspended.
B261096 Tilt Position Sensor or Tilt Motor Circuit Component Internal Failure The tilt operation is suspended.
B261196 Telescopic Position Sensor or Telescopic Motor Circuit Component Internal Failure The telescopic operation is suspended.
B2620A2 ECU Power Source Circuit System Voltage Low The tilt and telescopic operation is suspended.
U014287 Lost Communication with Body Control Module "B" Missing Message The tilt and telescopic operation is limited depending on which ECU has lost communication. For details, refer to Fail-safe Function.
U020887 Lost Communication with "Seat Control Module A" Missing Message

FAIL-SAFE FUNCTION


a.

If a malfunction in the tilt position sensor signal or telescopic position sensor signal occurs while operating the power tilt or power telescopic function, the multiplex tilt and telescopic ECU stops the operation of the power tilt and power telescopic steering column system.


b.

If the power source voltage to the ECU drops below approximately 8 V while operating the power tilt or power telescopic function, the ECU stops the operation of the power tilt and power telescopic steering column system.


c.

If the ECU detects that the motor has locked during the operation of the power tilt or power telescopic function, the ECU stops the operation of the power tilt and power telescopic steering column system.


d.

If the communication of an ECU that is related to the power tilt and power telescopic steering column system is interrupted, the control of functions of the multiplex tilt and telescopic ECU is limited as shown in the table below.



Tilt and Telescopic Operation Main Body ECU (Multiplex Network Body ECU) Communication Interruption Position Control ECU Assembly (Driver Seat) Communication Interruption All ECUs*1 Communication Interruption
Manual ○*2 ○ ○*2
Auto away/return X ○ X
Position memory (Memorization) X ○ X
Position memory (Recall) X X X

HINT:
·

○: Operates

X: Does not operate

·

*1: All ECUs that are related to the power tilt and power telescopic steering column system.

·

*2: The operation is permitted if the ignition switch to ON while the signal from the main body ECU (multiplex network body ECU) is interrupted. The operation is prohibited if the ignition switch is off while the signal from the main body ECU (multiplex network body ECU) is interrupted.