The multiplex tilt and telescopic ECU receives signals from the main body ECU (multiplex network body ECU) and position control ECU assembly (driver seat)* via CAN communication.
*: w/ Seat Memory
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| U014287 | Lost Communication with Body Control Module "B" Missing Message | One of the following conditions is met:
·
Signals (memory-related data) from the main body ECU (multiplex network body ECU) are interrupted for 3.3 seconds.
·
Signals (IG switch signals) from the main body ECU (multiplex network body ECU) are interrupted for 10 seconds or more. |
·
CAN communication system
·
Main body ECU (Multiplex network body ECU) |
Tilt&Telescopic | B |
| U020887 | Lost Communication with "Seat Control Module A" Missing Message | Signals (memory or recall request signal) received from the position control ECU assembly (driver seat) are interrupted for 10 seconds or more. |
·
CAN communication system
·
Position control ECU assembly (Driver seat)* |
Tilt&Telescopic | B |
*: w/ Seat Memory
Go to CAN Communication System.
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
| Proceed to |
|---|
| NEXT |
NEXT