Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › AUTOMATIC HIGH BEAM SYSTEM
RM38G0E _95 ADAS / AD _100650 ADVANCED DRIVER ASSISTANCE SYSTEM _0468607 AUTOMATIC HIGH BEAM SYSTEM D

ADVANCED DRIVER ASSISTANCE SYSTEM  AUTOMATIC HIGH BEAM SYSTEM  OPERATION CHECK  


AUTOMATIC HIGH BEAM SYSTEM OPERATION CHECK


a.
E398308C01
2.646,0.792 2.625,0.385 2.625,0.385 2.469,0.385 false 2.26,0.281 2.573,0.479 0.313,0.198 10 false *b 0.219,0.281 0.531,0.479 0.313,0.198 10 false *a
*a Automatic High Beam Indicator Light on Combination Meter Assembly
*b Auto High Beam Switch Indicator


Check the operation of the automatic high beam indicator light.

i.

Turn the ignition switch to ON.


ii.

Turn the light control switch to the AUTO or head position.


iii.

The low beams are operating.


iv.

Turn the headlight dimmer switch to the low position.


v.

Turn the auto high beam switch on.

NOTICE:

When the forward recognition camera cannot correctly detect objects due to inclement weather such as thick fog or other visual obstructions, the automatic high beam indicator may not turn on and consequently the automatic high beam system may not operate.



vi.

Check that the automatic high beam indicator light comes on.



b.

Check the operation of the automatic high beam function.

i.

At night, when driving the vehicle with the automatic high beam system in standby mode, check that the high beams automatically turn on after a short delay when all of the following conditions are met:

·

The vehicle speed is more than approximately 30 km/h (19 mph).

·

The area in front of the vehicle is dark.

·

There are no oncoming vehicles with headlights on.

·

There are no preceding vehicles with taillights on.

·

There are few streetlights along the street ahead.


NOTICE:

The low beams may not change to high beams due to illumination from city lighting, traffic lights or billboards, or due to reflective surfaces, such as signs or signboards.



ii.

At night, when driving the vehicle with the high beams turned on by the automatic high beam system, check that the automatic high beam system turns off the high beams and returns to standby mode when any of the following conditions are met:

·

The vehicle speed is less than approximately 25 km/h (16 mph).

·

The level of ambient light is higher than a specified threshold.

·

There are oncoming vehicles with headlights on.

·

There are preceding vehicles with taillights on.

·

Light from streetlights ahead is higher than a specified threshold.