DATA LIST
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
According to the display on the GTS, read the Data List.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Total Distance Traveled | - | - | - | Not applicable |
| Total Distance Traveled - Unit | - | - | - | Not applicable |
| FR Door Lock Position Switch Status | Front door RH unlock detection switch | LOCK or UNLOCK | LOCK: Front door RH locked UNLOCK: Front door RH unlocked |
- |
| FL Door Lock Position Switch Status | Front door LH unlock detection switch | LOCK or UNLOCK | LOCK: Front door LH locked UNLOCK: Front door LH unlocked |
- |
| RR Door Lock Position Switch Status | Rear door RH unlock detection switch | LOCK or UNLOCK | LOCK: Rear door RH locked UNLOCK: Rear door RH unlocked |
- |
| RL Door Lock Position Switch Status | Rear door LH unlock detection switch | LOCK or UNLOCK | LOCK: Rear door LH locked UNLOCK: Rear door LH unlocked |
- |
| FR Door Courtesy Switch Status | Front door courtesy light switch RH | ON or OFF | ON: Front door RH open OFF: Front door RH closed |
- |
| FL Door Courtesy Switch Status | Front door courtesy light switch LH | ON or OFF | ON: Front door LH open OFF: Front door LH closed |
- |
| RR Door Courtesy Switch Status | Rear door courtesy light switch RH | ON or OFF | ON: Rear door RH open OFF: Rear door RH closed |
- |
| RL Door Courtesy Switch Status | Rear door courtesy light switch LH | ON or OFF | ON: Rear door LH open OFF: Rear door LH closed |
- |
| Back Door Courtesy Switch Status | Back door courtesy light switch | ON or OFF | ON: Back door open OFF: Back door closed |
- |
| Hood Courtesy Switch Status | Engine hood courtesy switch | ON or OFF | ON: Engine hood open OFF: Engine hood closed |
- |
| Intrusion Sensor Cancel Switch | Intrusion sensor cancel switch* | ON or OFF | ON: Intrusion sensor cancel switch on OFF: Intrusion sensor cancel switch off |
- |
| Glass Breakage Sensor | Glass breakage sensor connecting* | With or Without | With: Glass breakage sensor connected Without: Glass breakage sensor not connected |
- |
| IGR Power | Ignition switch | ON or OFF | ON: Ignition switch ON OFF: Ignition switch off |
- |
| Communication Intrusion Sensor 1 | Theft warning ultrasonic and tilt sensor connecting* | ON or OFF | ON: Theft warning ultrasonic and tilt sensor connected OFF: Theft warning ultrasonic and tilt sensor not connected |
- |
*: w/ Intrusion Sensor Cancel Switch
ACTIVE TEST
Using the GTS, perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.
According to the display on the GTS, perform the Active Test.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Security Indicator | Security indicator | ON or OFF | - |
| Vehicle Horn | Vehicle horn | ON or OFF | - |
| Security Horn | Security horn assembly*1 | ON or OFF | - |
| Self Power Siren | Theft warning siren assembly*2 | ON or OFF | - |
*1: w/ Security Horn Assembly
*2: w/o Security Horn Assembly
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Immobiliser Indicator | Security indicator | ON or OFF | - |