84540 1.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
| *a | Component without harness connected (Park/Neutral Position Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
Click Location & Routing(C34)Location & Routingewd_type=routing;type=c;code=C34 |
||
| C34-4 (B) - C34-5 (L) | Shift lever in P or N | Below 1 Ω |
| C34-2 (RB) - C34-6 (PL) | Shift lever in P | Below 1 Ω |
| C34-2 (RB) - C34-1 (RL) | Shift lever in R | Below 1 Ω |
| C34-2 (RB) - C34-9 (NL) | Shift lever in N | Below 1 Ω |
| C34-2 (RB) - C34-7 (DL) | Shift lever in D, S, "+" or "-" | Below 1 Ω |
| C34-4 (B) - C34-5 (L) | Shift lever not in P or N | 10 kΩ or higher |
| C34-2 (RB) - C34-6 (PL) | Shift lever not in P | 10 kΩ or higher |
| C34-2 (RB) - C34-1 (RL) | Shift lever not in R | 10 kΩ or higher |
| C34-2 (RB) - C34-9 (NL) | Shift lever not in N | 10 kΩ or higher |
| C34-2 (RB) - C34-7 (DL) | Shift lever not in D, S, "+" or "-" | 10 kΩ or higher |
If the resistance value is not as specified, replace the park/neutral position switch assembly.