CUSTOMIZE LIGHTING SYSTEM (EXT)
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following items can be customized.
Customizing with the GTS
Enter the following menus: Customize Setting / Light Control, Headlight Control or Warning.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Tail Remind Buzzer Function | Sounds a buzzer when the driver door is opened with the light control switch in the tail or head position. | Enable | $00:Disable,$01:Enable | Main Body ECU (Multiplex Network Body ECU) |
| Light up Clearance Lights at Door Unlock Function | Turns on the parking lights for 15 seconds when the doors are unlocked by the smart key or the wireless key. | Enable | $00:Disable,$01:Enable | Main Body ECU (Multiplex Network Body ECU) |
| Extended Headlight Lighting | Sets the headlight lighting time after the ignition switch is turned off. | 30sec | $00:30sec,$01:60sec,$02:90sec,$03:120sec | Main Body ECU (Multiplex Network Body ECU) |
| Brightness Level Adjust (Lowering) | Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A | Normal | $00:Normal,$01:Dark2,$02:Dark1,$03:Light1,$04:Light2 | Main Body ECU (Multiplex Network Body ECU) |
| Brightness Level Adjust (Canceling) | Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B | Normal | $00:Normal,$01:Dark2,$02:Dark1,$03:Light1,$04:Light2 | Main Body ECU (Multiplex Network Body ECU) |
| Sensitivity Adjust | Adjusts the sensitivity of the automatic light control system.*C | Normal | $00:Normal,$01:Dark2,$02:Dark1,$03:Light1,$04:Light2 | Main Body ECU (Multiplex Network Body ECU) |
The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
*A
*B
*C
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| AHS Function | Adaptive high beam system function setting.*1 | Valid | $00:Valid,$01:Invalid | Headlight ECU Sub-assembly LH |
| Electronic Swivel Function | Adaptive high beam system swivel function setting. | Valid | $00:Valid,$01:Invalid | Headlight ECU Sub-assembly LH |
| Town Mode | Adaptive high beam system town mode setting. | Valid | $00:Valid,$01:Invalid | Headlight ECU Sub-assembly LH |
| aCol Function | Projection distance adjustment of the low beams according to the distance to a preceding vehicle. | Valid | $00:Valid,$01:Invalid | Headlight ECU Sub-assembly LH |
| Rain Mode | Headlight dimming function setting during rainy weather. | Valid | $00:Valid,$01:Invalid | Headlight ECU Sub-assembly LH |
| AHS Operation Vehicle Speed Setting (Pattern1) | Adaptive high beam system speed pattern setting. (Pattern 1)*2 | ON | $00:OFF,$01:ON | Headlight ECU Sub-assembly LH |
| AHS Operation Vehicle Speed Setting (Pattern2) | Adaptive high beam system speed pattern setting. (Pattern 2)*2 | OFF | $00:OFF,$01:ON | Headlight ECU Sub-assembly LH |
| AHS Operation Vehicle Speed Setting (Pattern3) | Adaptive high beam system speed pattern setting. (Pattern 3)*2 | OFF | $00:OFF,$01:ON | Headlight ECU Sub-assembly LH |
*1: If the customize setting AHS Function is set to "Invalid", the automatic high beam system will operate.
*2: The customize function item "AHS Operation Vehicle Speed Setting" can be set as shown below.
| Residential Area Mode | Normal Mode | High Speed Mode | ||||
|---|---|---|---|---|---|---|
| Operation Speed | Cancellation Speed | Operation Speed | Cancellation Speed | Operation Speed | Cancellation Speed | |
| for Europe | 15 km/h (9 mph) or more | 12 km/h (7 mph) less than | 30 km/h (19 mph) or more | 25 km/h (16 mph) less than | 120 km/h (75 mph) or more | 100 km/h (62 mph) less than |
| except Europe | 15 km/h (9 mph) or more | 12 km/h (7 mph) less than | 30 km/h (19 mph) or more | 25 km/h (16 mph) less than | 80 km/h (50 mph) or more | 60 km/h (37 mph) less than |
| Residential Area Mode | Normal Mode | High Speed Mode | ||||
|---|---|---|---|---|---|---|
| Operation Speed | Cancellation Speed | Operation Speed | Cancellation Speed | Operation Speed | Cancellation Speed | |
| for Europe | Not Available | Not Available | 30 km/h (19 mph) or more | 25 km/h (16 mph) less than | 120 km/h (75 mph) or more | 100 km/h (62 mph) less than |
| except Europe | Not Available | Not Available | 30 km/h (19 mph) or more | 25 km/h (16 mph) less than | 80 km/h (50 mph) or more | 60 km/h (37 mph) less than |
| Residential Area Mode | Normal Mode | High Speed Mode | ||||
|---|---|---|---|---|---|---|
| Operation Speed | Cancellation Speed | Operation Speed | Cancellation Speed | Operation Speed | Cancellation Speed | |
| for Europe | Not Available | Not Available | 60 km/h (37 mph) or more | 40 km/h (25 mph) less than | 120 km/h (75 mph) or more | 100 km/h (62 mph) less than |
| except Europe | Not Available | Not Available | 40 km/h (25 mph) or more | 30 km/h (19 mph) less than | 80 km/h (50 mph) or more | 60 km/h (37 mph) less than |
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Lane Change Flashing Times Adjust | Function to change the lane change flashing times. | 3 | $00:OFF,$01:3,$02:4,$03:5,$04:6,$05:7 | Combination Meter Assembly |
Customizing with the multi-display
Turn the ignition switch to ON.
Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Lights Settings.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Headlights Auto-on Sensitivity | 0 | Adjusts the sensitivity of the automatic light control system.*A | -2, -1, 0, +1 or +2 | Main Body ECU (Multiplex Network Body ECU) |
The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
*A