ECM
The standard voltage between each pair of ECM terminals is shown in the table below. In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the ECM terminals.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
|
*: w/ DAC/CRAWL switch |
|||
| C92-8 (SLU+) - C92-7 (SLU-) | Shift solenoid valve SLU signal | 2nd, 3rd, 4th, 5th or 6th gear (Flex lock-up on) | Pulse generation |
| C92-10 (SLT+) - C92-9 (SLT-) | Shift solenoid valve SLT signal | Engine idling | Pulse generation |
| C92-12 (SL2+) - C92-11 (SL2-) | Shift solenoid valve SL2 signal | 4th, 5th or 6th gear | Pulse generation |
| C92-14 (SL1+) - C92-13 (SL1-) | Shift solenoid valve SL1 signal | 1st, 2nd, 3rd or 4th gear | Pulse generation |
| C92-17 (PLKC) - C92-81 (E1) | Shift lock release signal | Ignition switch ON, shift lever in P and brake pedal depressed | 10 to 14 V |
| C92-26 (R) - C92-81 (E1) | R shift position switch signal | Ignition switch ON and shift lever in R | 11 to 14 V |
| Ignition switch ON and shift lever not in R | Below 1 V | ||
| C92-27 (P) - C92-81 (E1) | P shift position switch signal | Ignition switch ON and shift lever in P | 11 to 14 V |
| Ignition switch ON and shift lever not in P | Below 1 V | ||
| C92-29 (SL4+) - C92-28 (SL4-) | Shift solenoid valve SL4 signal | 3rd or 5th gear | Pulse generation |
| C92-39 (SL) - C92-81 (E1) | Shift solenoid valve SL signal | All gears | 11 to 14 V |
| C92-48 (NSW) - C92-81 (E1) | Park/neutral position switch signal | Ignition switch ON and shift lever in P or N | Below 1 V |
| Ignition switch ON and shift lever not in P or N | 11 to 14 V | ||
| C92-49 (D) - C92-81 (E1) | D shift position switch signal | Ignition switch ON and shift lever in D, S, "+" or "-" | 11 to 14 V |
| Ignition switch ON and shift lever not in D, S, "+" or "-" | Below 1 V | ||
| C92-50 (N) - C92-81 (E1) | N shift position switch signal | Ignition switch ON and shift lever in N | 11 to 14 V |
| Ignition switch ON and shift lever not in N | Below 1 V | ||
| C92-55 (NTB) - C92-81 (E1) | Power source for sensor (fixed voltage) | Ignition switch ON | 11 to 14 V |
| C92-56 (NTO) - C92-81 (E1) | Transmission revolution sensor (NT) signal | Engine idling | Pulse generation |
| C92-57 (SP2B) - C92-81 (E1) | Power source for sensor (fixed voltage) | Ignition switch ON | 11 to 14 V |
| C92-58 (SP2O) - C92-81 (E1) | Transmission revolution sensor (SP2) signal | Vehicle driving | Pulse generation |
| C92-79 (THO2) - C92-114 (ETH2) | No. 2 ATF temperature sensor signal | No. 2 ATF temperature: 115°C (239°F) or higher | Below 1.5 V |
| C92-80 (THO1) - C92-91 (ETH0) | No. 1 ATF temperature sensor signal | No. 1 ATF temperature: 115°C (239°F) or higher | Below 1.5 V |
| B2-5 (SL3+) - B2-13 (SL3-) | Shift solenoid valve SL3 signal | 2nd or 6th gear | Pulse generation |
| B2-11 (CANH) - C92-81 (E1) | CAN communication line | Ignition switch ON | Pulse generation |
| B2-12 (SNWI) - C92-81 (E1) | 2nd switch (integration control & panel sub-assembly) signal | Ignition switch ON and 2nd switch not pushed | 11 to 14 V |
| Ignition switch ON and 2nd switch pushed | Below 1.5 V | ||
| B2-15 (ROTA) - C92-81 (E1) | MODE SELECT switch (integration control & panel sub-assembly) signal* | Ignition switch ON and MODE SELECT switch turned to the right | Below 1 V → 11 to 14 V → 11 to 14 V → Below 1 V (Repeatedly cycles to the above voltage) |
| B2-19 (CANL) - C92-81 (E1) | CAN communication line | Ignition switch ON | Pulse generation |
| B2-27 (S) - C92-81 (E1) | S shift position switch signal | Ignition switch ON and shift lever in S | 11 to 14 V |
| Ignition switch ON and shift lever not in S | Below 1 V | ||
| B2-35 (L4) - C92-81 (E1) | L4 position signal | Ignition switch ON and transfer in L4 | Below 1 V |
| Ignition switch ON and transfer not in L4 | 11 to 14 V | ||
| B2-36 (ROTB) - C92-81 (E1) | MODE SELECT switch (integration control & panel sub-assembly) signal* | Ignition switch ON and MODE SELECT switch turned to the right | Below 1 V → Below 1 V → 11 to 14 V → 11 to 14 V (Repeatedly cycles to the above voltage) |
| B2-39 (SFTU) - C92-81 (E1) | Up-shift position switch signal | Ignition switch ON and shift lever in S | 11 to 14 V |
| Ignition switch ON and shift lever held in "+" (up-shift) | Below 1 V | ||
| B2-47 (SFTD) - C92-81 (E1) | Down-shift position switch signal | Ignition switch ON and shift lever in S | 11 to 14 V |
| Ignition switch ON and shift lever held in "-" (down-shift) | Below 1 V | ||
| B2-49 (PWR) - C92-81 (E1) | PWR switch (integration control & panel sub-assembly) signal | Ignition switch ON and PWR switch not pushed | 11 to 14 V |
| Ignition switch ON and PWR switch pushed | Below 1.5 V | ||