46310B 1.INSPECT PARKING BRAKE ACTUATOR ASSEMBLY
Parking brake actuator assembly operation inspection
| *A | for LH Side |
| *B | for RH Side |
| *a | Component without harness connected (Parking Brake Actuator Assembly) |
| *b | Lock |
| *c | Release |
Apply voltage to the terminals of the parking brake actuator assembly and check that it operates as specified.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(t2)Location & Routingewd_type=routing;type=c;code=t2 Click Connector(t2)Body>No. 2 Parking Brake Wire Assembly>Parking Brake Actuator Assembly LHewd_type=component;type=c;code=t2;pinno=2,1 |
|
| Auxiliary battery positive (+) - t2-2 (MRL+) Auxiliary battery negative (-) - t2-1 (MRL-) |
Lock |
| Auxiliary battery positive (+) - t2-1 (MRL-) Auxiliary battery negative (-) - t2-2 (MRL+) |
Release |
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(s2)Location & Routingewd_type=routing;type=c;code=s2 Click Connector(s2)Body>No. 1 Parking Brake Wire Assembly>Parking Brake Actuator Assembly RHewd_type=component;type=c;code=s2;pinno=2,1 |
|
| Auxiliary battery positive (+) - s2-2 (MRR+) Auxiliary battery negative (-) - s2-1 (MRR-) |
Lock |
| Auxiliary battery positive (+) - s2-1 (MRR-) Auxiliary battery negative (-) - s2-2 (MRR+) |
Release |
If the result is not as specified, replace the parking brake actuator assembly.