| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | ELECTRIC PARKING BRAKE SWITCH ASSEMBLY | 84390B | - | - | - |
| 2 | TRANSFER POSITION SWITCH | 84223A | - | - | - |
| *1 | CABLE TIE | - | - |
| ● | Non-reusable part | - | - |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84390B 1.INSTALL ELECTRIC PARKING BRAKE SWITCH ASSEMBLY
| *a | Bottom of Vehicle | *b | 1.0 to 1.5 mm (0.039 to 0.059 in.) |
| *c | Cable Tie | *d | Positioning Tape (White) |
Install the electric parking brake switch assembly with the 2 screws.
Secure the electric parking brake switch assembly and shift position indicator wire with a new cable tie at the position shown in the illustration.
Install a new cable tie at the area with the positioning tape.
84223A 2.INSTALL TRANSFER POSITION SWITCH