Home › Brake › PARKING BRAKE › ELECTRIC PARKING BRAKE SWITCH › 2021.04–2022.11
RM38G0E _54 Brake _100998 PARKING BRAKE _0468756 ELECTRIC PARKING BRAKE SWITCH G

PARKING BRAKE  ELECTRIC PARKING BRAKE SWITCH  INSPECTION  


PROCEDURE

Hide 84390B 1.INSPECT ELECTRIC PARKING BRAKE SWITCH ASSEMBLY

a.

Check the resistance.

i.
C398938C49
1.51,0.177 1.927,0.427 0.417,0.25 2.26,0.385 1.979,1.031 true 1.958,1.344 2.167,1.813 true 2.719,0.438 2.156,1.042 true 2.146,1.333 2.688,1.74 true 2.604,1.781 3.219,1.979 0.615,0.198 10 false SWI1 2.042,1.844 2.656,2.042 0.615,0.198 10 false SWO1 2.615,0.26 3.229,0.458 0.615,0.198 10 false SWI2 2.135,0.208 2.75,0.406 0.615,0.198 10 false SWO2 0.115,0.135 0.427,0.333 0.313,0.198 10 false *a 1.625,0.24 2.083,0.438 0.458,0.198 10 false I89
*a Component without harness connected
(Electric Parking Brake Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(I89)Location & Routing

Click Connector(I89)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Electric Parking Brake Switch Assembly

I89-7 (SWI1) - I89-8 (SWO1) OFF (Release) 100 kΩ or higher
I89-7 (SWI1) - I89-8 (SWO1) ON (Lock) 10 Ω or less
I89-7 (SWI1) - I89-8 (SWO1) Switch not operated 100 kΩ or higher
I89-7 (SWI1) - I89-1 (SWI2) OFF (Release) 10 Ω or less
I89-7 (SWI1) - I89-1 (SWI2) ON (Lock) 10 Ω or less
I89-7 (SWI1) - I89-1 (SWI2) Switch not operated 100 kΩ or higher
I89-7 (SWI1) - I89-2 (SWO2) OFF (Release) 10 Ω or less
I89-7 (SWI1) - I89-2 (SWO2) ON (Lock) 100 kΩ or higher
I89-7 (SWI1) - I89-2 (SWO2) Switch not operated 10 Ω or less
I89-1 (SWI2) - I89-8 (SWO1) OFF (Release) 100 kΩ or higher
I89-1 (SWI2) - I89-8 (SWO1) ON (Lock) 10 Ω or less
I89-1 (SWI2) - I89-8 (SWO1) Switch not operated 10 Ω or less
I89-1 (SWI2) - I89-2 (SWO2) OFF (Release) 10 Ω or less
I89-1 (SWI2) - I89-2 (SWO2) ON (Lock) 100 kΩ or higher
I89-1 (SWI2) - I89-2 (SWO2) Switch not operated 100 kΩ or higher



ii.

If the result is not as specified, replace the electric parking brake switch assembly.



b.

Check the Illumination.

i.
C398938C48
1.51,0.198 1.927,0.458 0.417,0.26 1.833,1.354 2.25,1.75 true 1.25,1.021 0.75,0.833 true 0.135,0.188 0.448,0.385 0.313,0.198 10 false *a 2.313,1.688 2.927,1.885 0.615,0.198 10 false ILL+ 0.479,0.729 1.094,0.927 0.615,0.198 10 false ILL- 1.625,0.26 2.083,0.458 0.458,0.198 10 false I89
*a Component without harness connected
(Electric Parking Brake Switch Assembly)


Apply auxiliary battery voltage to the electric parking brake switch assembly and check that the switch illuminates.

OK:
Tester Connection Specified Condition

Click Location & Routing(I89)Location & Routing

Click Connector(I89)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Electric Parking Brake Switch Assembly

Auxiliary battery positive (+) → I89-9 (ILL+)
Auxiliary battery negative (-) → I89-6 (ILL-)
Illuminates



ii.

If the result is not as specified, replace the electric parking brake switch assembly.