CHECK STEREO COMPONENT EQUALIZER ASSEMBLY
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| S20-14 (+B) - S20-28 (GND) | Power source | Always | 11 to 14 V |
| S20-27 (IGN) - S20-28 (GND) | Power source (IG) | Ignition switch ON | 11 to 14 V |
| S20-13 (ACC) - S20-28 (GND) | Power source (ACC) | Ignition switch ACC | 11 to 14 V |
| S20-28 (GND) - Body ground | Ground | Always | Below 1 Ω |
| S20-7 (MC1+) - S20-28 (GND) | Active noise control microphone input signal | No. 1 active noise control microphone tapped with finger | Pulse generation |
| S20-21 (MC1-) - S20-28 (GND) | Active noise control microphone input signal | Always | Below 1 Ω |
| S20-6 (MC2+) - S20-28 (GND) | Active noise control microphone input signal | No. 2 active noise control microphone tapped with finger | Pulse generation |
| S20-20 (MC2-) - S20-28 (GND) | Active noise control microphone input signal | Always | Below 1 Ω |
| S20-5 (MC3+) - S20-28 (GND) | Active noise control microphone input signal | No. 3 active noise control microphone tapped with finger | Pulse generation |
| S20-19 (MC3-) - S20-28 (GND) | Active noise control microphone input signal | Always | Below 1 Ω |
| S20-4 (MC4+) - S20-28 (GND) | Active noise control microphone input signal | No. 4 active noise control microphone tapped with finger | Pulse generation |
| S20-18 (MC4-) - S20-28 (GND) | Active noise control microphone input signal | Always | Below 1 Ω |
| S20-3 (NEI) - S20-28 (GND) | Engine pulse signal | Idling with warm engine | Pulse generation (See waveform 1) |
| S20-12 (CH1+) - S20-28 (GND) | Active noise control output signal | Active noise control system operating | Pulse generation |
| S20-26 (CH1-) - S20-28 (GND) | Active noise control output signal | Active noise control system operating | Pulse generation |
| S20-11 (CH2+) - S20-28 (GND) | Active noise control output signal | Active noise control system operating | Pulse generation |
| S20-25 (CH2-) - S20-28 (GND) | Active noise control output signal | Active noise control system operating | Pulse generation |
| S20-10 (CH3+) - S20-28 (GND) | Active noise control output signal | Active noise control system operating | Pulse generation |
| S20-24 (CH3-) - S20-28 (GND) | Active noise control output signal | Active noise control system operating | Pulse generation |
| S20-17 (ACNT) - S20-28 (GND) | Active noise control system control signal | Active noise control system not operating | Below 1 V |
| Active noise control system operating | 4.5 V or higher | ||
| S20-2 (ACK1) | Serial communication (UART) signal | - | - |
| S20-16 (ACK2) | Serial communication (UART) signal | - | - |
| S20-1 (CANH) | CAN communication signal | - | - |
| S20-15 (CANL) | CAN communication signal | - | - |
Waveform 1
The oscilloscope waveform shown in the illustration is an example for reference only. The waveform fluctuates according to engine speed.
| Item | Condition |
|---|---|
| Measurement terminal | S20-3 (NEI) - S20-28 (GND) |
| Tool setting | 5 V/DIV., 20 ms./DIV. |
| Vehicle condition | Idling with warm engine |
STEREO COMPONENT AMPLIFIER ASSEMBLY
w/ Navigation System: Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>TERMINALS OF ECU
w/o Navigation System: Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type, for 12.3 Inch Display)>TERMINALS OF ECU