Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › TOYOTA MULTI OPERATION TOUCH SYSTEM
RM38G0E _56 Audio / Visual / Telematics _100607 NAVIGATION / MULTI INFO DISPLAY _0467505 TOYOTA MULTI OPERATION TOUCH SYSTEM U

NAVIGATION / MULTI INFO DISPLAY  TOYOTA MULTI OPERATION TOUCH SYSTEM  DATA LIST / ACTIVE TEST  


DATA LIST


NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


a.

Enter the following menus: Body Electrical / D-SEAT SW / Data List.


b.

Read the Data List according to the display on the GTS.

Body Electrical > D-SEAT SW > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Number of Trouble Codes Number of stored DTCs min.: 0, max.: 255 Number of DTCs will be displayed -