Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM
RM38G0E _56 Audio / Visual / Telematics _100607 NAVIGATION / MULTI INFO DISPLAY _0467503 NAVIGATION SYSTEM C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  U0073  Sending Malfunction (Navigation to APGS)  U0100  Engine/EV ECU Communication  U0129  VSC(ECB)ECU Communication  U0140  Lost Communication with Body Control Module  U0155  Meter ECU Communication  U0164  Air Conditioner ECU Communication  U023B  Lost Communication with Image Processing Module "B"  U0265  Lost Communication with Image Processing Sensor A  U1110  Clearance Sonar ECU Communication  


DESCRIPTION

These DTCs are stored when a malfunction occurs in the CAN communication circuit.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U0073 Sending Malfunction (Navigation to APGS) CAN bus connection error CAN communication system Navigation System B
U0100 Engine/EV ECU Communication CAN reception error CAN communication system Navigation System B
U0129 VSC(ECB)ECU Communication CAN reception error CAN communication system Navigation System B
U0140 Lost Communication with Body Control Module CAN reception error CAN communication system Navigation System B
U0155 Meter ECU Communication CAN reception error CAN communication system Navigation System B
U0164 Air Conditioner ECU Communication CAN reception error CAN communication system Navigation System B
U023B Lost Communication with Image Processing Module "B" CAN reception error CAN communication system Navigation System B
U0265 Lost Communication with Image Processing Sensor A CAN reception error CAN communication system Navigation System B
U1110 Clearance Sonar ECU Communication CAN reception error CAN communication system Navigation System B

PROCEDURE

1.CHECK DTC (CAN COMMUNICATION SYSTEM)

Pre-procedure1

a.

Clear the DTCs.

Body Electrical > Navigation System > Clear DTCs
50002 212

Procedure1

b.

Recheck for DTCs and check if the same DTC is output again.

Body Electrical > Navigation System > Trouble Codes
50001 212
Result:
Result Proceed to
DTCs are not output A
DTCs are output B



Post-procedure1

c.

None



A

B