Steering sensor signals are sent to the absorber control ECU via CAN communication.
If a communication error is detected, DTC C1784 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Memory |
|---|---|---|---|---|---|
| C1784 | Steering Angle Sensor Communication Error | A steering sensor communication error is detected, or a steering sensor power malfunction is detected for 5 seconds or more. | Electronically controlled brake system | Does not come on | Yes (Under some of the detection conditions (sensor power +B open malfunction is detected), DTC is not stored.) |
| Vehicle Condition | ||||
|---|---|---|---|---|
| Pattern 1 | Pattern 2 | |||
| Diagnosis Condition | Ignition switch is ON | ○ | ○ | |
| Malfunction Status | Steering sensor | Communication error is detected | ○ | - |
| Power malfunction is detected | - | ○ | ||
| Detection Time | 5 seconds or more | 5 seconds or more | ||
| Number of Trips | 1 trip | 1 trip | ||
Go to electronically controlled brake system.
| Proceed to |
|---|
| NEXT |
NEXT