DATA LIST
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| My Settings Function | Setting of my settings function. | Disable or Enable | Customized setting displayed | - |
| Driver Recognition Auto Switch Function | Sets the function that switches driver information when the door is opened/closed | Disable or Enable | Customized setting displayed | - |
| Automatically Switch Function (Key) | Sets the function that uses key authentication to switch driver information | Disable or Enable | Customized setting displayed | - |
| Automatically Switch Function (Fingerprint) | Sets the function that uses fingerprint authentication to switch driver information | Disable or Enable | Customized setting displayed | - |
| Entry Unlock Correction Function | Sets the function that uses entry door unlock control for personal identification | Disable or Enable | Customized setting displayed | - |
| Wireless Unlock Correction Function | Sets the function that uses wireless door unlock control for personal identification | Disable or Enable | Customized setting displayed | - |
| Inside Key Correction Function | Sets the function that uses interior certification for personal identification | Disable or Enable | Customized setting displayed | - |
| My Settings Priority Adjust (Inside Key) | Adjusts the priority for determining an individual using an inside key | 00%, 05%, 10%, 15%, 20%, 25%, 30%, 35%, 40%, 45%, 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95% or 100% | Customized setting displayed | - |
| My Settings Priority Adjust (Outside Key) | Adjusts the priority for determining an individual using an outside key | 00%, 05%, 10%, 15%, 20%, 25%, 30%, 35%, 40%, 45%, 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95% or 100% | Customized setting displayed | - |
| My Settings Priority Adjust (Fingerprint) | Adjusts the priority for determining an individual using fingerprint authentication | 00%, 05%, 10%, 15%, 20%, 25%, 30%, 35%, 40%, 45%, 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95% or 100% | Customized setting displayed | - |
| Interior Lights Lighting Timer Setting | Function to set the lighting time of interior lights. | Normal, Short or Long | Customized setting displayed | - |
| Interior Lights ON Function | Function to set the lighting control of interior lights. | Disable or Enable | Customized setting displayed | - |
| Exterior Lights Lighting Timer Setting | Function to set the lighting time of exterior lights. | Normal, Short or Long | Customized setting displayed | - |
| Exterior Lights ON Function | Function to set the lighting control of exterior lights. | Disable or Enable | Customized setting displayed | - |
| Wireless Unlock Twice Function | Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Disable, pressing unlock switch once makes all doors unlock | Disable or Enable | Customized setting displayed | - |
| Entry Unlock Twice Function | Function that unlocks only the driver door when operated once, and unlocks all the other doors when operated twice. | Disable or Enable | Customized setting displayed | - |
| Door Auto Lock Timer Setting | Function that regulates the interval between unlocking and automatic relocking of doors. | 30sec, 60sec or 120sec | Customized setting displayed | - |
| Hazard Answer Back Function | When the doors are locked by wireless operation, the hazard warning lights flash once. When the doors are unlocked by wireless operation, the hazard warning lights flash twice. |
Disable or Enable | Customized setting displayed | - |
| Wireless Buzzer Volume Setting | Wireless door lock buzzer volume. | Level7(MAX), Level6, Level5, Level4, Level3, Level2, Level1 or Level0(MIN) | Customized setting displayed | - |
| Sensitivity Adjust | Adjusts the sensitivity of the automatic light control system. | Normal, Dark2, Dark1, Light1 or Light2 | Customized setting displayed | - |
| Support Service Function | Function to set the proposal service which supports a user. | OFF, Parked or ON | Customized setting displayed | - |
| Driver Seat Distance Adjust when Get Off | Function to set the distance of movements which moves a driver's seat back. | OFF, Little or Normal | Customized setting displayed | - |
| Memory Call Function | Function to set the service of adjusting seat position automatically etc. from information of an electronic key etc. | Disable or Enable | Customized setting displayed | - |
| Driver Recognition Status | Driver recognition status | None, Driver1, Driver2, Driver3 or Guest | Condition can be displayed | - |
| Driver1 and key ID1 Link Status | Driver1 and key ID1 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver1 and key ID2 Link Status | Driver1 and key ID2 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver1 and key ID3 Link Status | Driver1 and key ID3 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver1 and key ID4 Link Status | Driver1 and key ID4 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver1 and key ID5 Link Status | Driver1 and key ID5 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver1 and key ID6 Link Status | Driver1 and key ID6 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver1 and key ID7 Link Status | Driver1 and key ID7 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver2 and key ID1 Link Status | Driver2 and key ID1 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver2 and key ID2 Link Status | Driver2 and key ID2 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver2 and key ID3 Link Status | Driver2 and key ID3 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver2 and key ID4 Link Status | Driver2 and key ID4 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver2 and key ID5 Link Status | Driver2 and key ID5 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver2 and key ID6 Link Status | Driver2 and key ID6 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver2 and key ID7 Link Status | Driver2 and key ID7 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver3 and key ID1 Link Status | Driver3 and key ID1 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver3 and key ID2 Link Status | Driver3 and key ID2 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver3 and key ID3 Link Status | Driver3 and key ID3 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver3 and key ID4 Link Status | Driver3 and key ID4 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver3 and key ID5 Link Status | Driver3 and key ID5 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver3 and key ID6 Link Status | Driver3 and key ID6 link status | Without or With | Without: No link setting With: Link setting |
- |
| Driver3 and key ID7 Link Status | Driver3 and key ID7 link status | Without or With | Without: No link setting With: Link setting |
- |