Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM
RM38G0E _51 Engine / Hybrid System _101082 CRUISE CONTROL _0469134 CRUISE CONTROL SYSTEM L

CRUISE CONTROL  CRUISE CONTROL SYSTEM  PRECAUTION  


HANDLING PRECAUTION FOR CRUISE CONTROL SYSTEM


a.

Turn the cruise control system off using the cruise control main switch when not using the cruise control system.


b.

Be careful of increasing vehicle speed when driving the vehicle in cruise control on downhill slopes.


c.

The + (ACCEL)/RES (RESUME) operation changes according to the cruise control system status. When the cruise control system is controlling vehicle speed, the + (ACCEL) function operates. When the cruise control system is not controlling vehicle speed, the RES (RESUME) function operates.


d.

While the cruise control system is controlling vehicle speed, if the cruise control indicator turns off and a warning message is displayed, turn the cruise control system off using the cruise control main switch to reset the cruise control system. After the cruise control system is reset, if the cruise control system does not turn on, or if the cruise control system stops functioning immediately after being turned on, there may be a malfunction.


e.

Do not use the cruise control system where the road conditions are as follows:

·

Heavy traffic

·

Steep downhill roads

·

Roads with sharp turns

·

Icy or snowy roads

·

Slippery roads



f.

Do not use the cruise control system while towing.



REPLACEMENT PRECAUTIONS


a.

ECM:

·

It is necessary to perform initialization after replacing the ECM.

·

Before replacing the ECM, refer to Service Bulletin.

·

When the ECM is replaced, update the ECU security key.

Click hereGeneral>SETUP>WHEN REPLACING OR REMOVING/INSTALLING PARTS>UPDATE ECU SECURITY KEY