Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › PRE-COLLISION SYSTEM
RM38G0E _95 ADAS / AD _100650 ADVANCED DRIVER ASSISTANCE SYSTEM _0469137 PRE-COLLISION SYSTEM C

ADVANCED DRIVER ASSISTANCE SYSTEM  PRE-COLLISION SYSTEM  C142571  Stop Light Relay Actuator Stuck  


DESCRIPTION

The No. 2 skid control ECU (brake actuator assembly) sends a stop light operation request signal to the stop light control relay (stop light switch assembly). When the No. 2 skid control ECU (brake actuator assembly) detects a malfunction relating to the stop light circuit, the forward recognition camera is notified via CAN communication, and C142571 is output.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
C142571 Stop Light Relay Actuator Stuck Once 3 seconds elapse after turning the ignition switch to ON, the system receives a stop light circuit malfunction signal from the No. 2 skid control ECU (brake actuator assembly) for approximately 1 second or more. Electronically controlled brake system Pre-Collision System B

PROCEDURE

1.CHECK ELECTRONICALLY CONTROLLED BRAKE SYSTEM
a.

Check the electronically controlled brake system.

HINT:

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING


HINT:

When C142571 is detected by the pre-collision system, C13807E or C13807F may also be detected in the electronically controlled brake system. Therefore, check the electronically controlled brake system first when C142571 is detected.



Result:
Proceed to
NEXT



NEXT

END