When the brakes are applied by the dynamic radar cruise control system, the No. 2 skid control ECU (brake actuator assembly) operates the stop light switch assembly to illuminate the stop lights.
If the ECM receives a signal from the No. 2 skid control ECU (brake actuator assembly) indicating a malfunction of the stop light switch assembly, DTC P057113 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| P057113 | Brake Switch "A" Circuit Open | When the dynamic radar cruise control system is operating, the ECM detects a signal indicating a stop light switch assembly malfunction from the No. 2 skid control ECU (brake actuator assembly) for approximately 1 second or more. | Electronically controlled brake system | Cruise Control | B |
Check the electronically controlled brake system.
| Proceed to |
|---|
| NEXT |
NEXT