CUSTOMIZE LANE DEPARTURE ALERT SYSTEM
Record the settings when the vehicle is brought to the workshop so they can be restored.
Customizing with the multi-information display
Turn the ignition switch to ON.
Change the setting of the lane departure alert system by operating the customize switch (steering pad switch).
Each lane departure alert system item is displayed on the "Setting" tab on the multi-information display.
| Display | Content | Setting |
|---|---|---|
|
*: w/ Steering Vibration Function |
||
| Alert* | Method of lane departure alert | Steering vibrator/Buzzer |
| Sensitivity | Select the warning timing for the lane departure alert function | High/Standard |
| Sway Warning | Select on/off for the vehicle sway warning function | On/Off |
| Sway Sensitivity | Select the warning sensitivity for the sway warning function | High/Standard/Low |
Some lane departure alert system functions are available only when other functions are operating or enabled. When the following switch and operating conditions are met, each of the lane departure alert system functions are enabled.
| LDA Switch | Sway Warning | |
|---|---|---|
|
○: Enabled |
||
| Lane Departure Alert Function | ○ | - |
| Yaw Assist Function | ○ | - |
| Vehicle Sway Warning Function | - | ○ |