FAIL-SAFE FUNCTION
When a malfunction occurs in the lane departure alert system, a message is displayed on the multi-information display and control is canceled in accordance with the malfunction.
| Warning Message | Cause | Fail-safe Operation | Conditions to Return to Normal Condition | ||
|---|---|---|---|---|---|
| Lane Departure Alert Function | Yaw Assist Function | Vehicle Sway Warning Function | |||
|
X: Control canceled |
|||||
| "Lane Departure Alert Malfunction Visit Your Dealer" | Lane departure alert system malfunction is detected |
X | X | X | After the system returns to normal, turn the ignition switch off → ON or turn the LDA switch from off → on |
| "Front Camera Out of Temperature Range Unavailable Wait until Normal Temperature" | Outside of forward recognition camera guaranteed operating temperature | X | X | X | After forward recognition camera guaranteed operating temperature is restored |
| "Front Camera Unavailable See Owner's Manual" | Outside of forward recognition camera guaranteed operating voltage | X | X | X | After forward recognition camera guaranteed operating voltage is restored |
| Forward recognition camera is temporarily unavailable (forward recognition camera recognition stopped) | X | X | X | After forward recognition camera returns to normal | |
| "Front Camera Low Visibility Unavailable See Owner's Manual" |
·
Windshield glass is dirty or fogged up
·
Forward recognition camera is dirty or fogged up |
X | X | X | After dirt or fog is removed from windshield glass and forward recognition camera |
| "Lane Departure Alert Unavailable" | Sensor other than the forward recognition camera sensor is temporary unavailable |
X | X | X | When temporarily unavailable sensor returns to normal |