Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › ROAD SIGN ASSIST SYSTEM
RM38G0E _95 ADAS / AD _100650 ADVANCED DRIVER ASSISTANCE SYSTEM _0469140 ROAD SIGN ASSIST SYSTEM C

ADVANCED DRIVER ASSISTANCE SYSTEM  ROAD SIGN ASSIST SYSTEM  U010087  Lost Communication with ECM/PCM "A" Missing Message  U010187  Lost Communication with TCM Missing Message  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U014087  Lost Communication with Body Control Module Missing Message  U015587  Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message  


DESCRIPTION

The forward recognition camera communicates with each sensor and ECU via CAN communication.

If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U010087 Lost Communication with ECM/PCM "A" Missing Message 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on, a communication error between the ECM and the forward recognition camera is detected for approximately 5 seconds or more. CAN communication system Road Sign Assist B
U010187 Lost Communication with TCM Missing Message 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on, a communication malfunction between the forward recognition camera and the TCM is continuously detected for 5 seconds or more. CAN communication system Road Sign Assist B
U012687 Lost Communication with Steering Angle Sensor Module Missing Message 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on, a communication malfunction between the forward recognition camera and the steering sensor is continuously detected for 5 seconds or more. CAN communication system Road Sign Assist B
U012987 Lost Communication with Brake System Control Module Missing Message 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on, a communication error between the No. 2 skid control ECU (brake actuator assembly) and the forward recognition camera is detected for approximately 5 seconds or more. CAN communication system Road Sign Assist B
U014087 Lost Communication with Body Control Module Missing Message 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on, a communication error between the main body ECU (multiplex network body ECU) and the forward recognition camera is detected for approximately 5 seconds or more. CAN communication system Road Sign Assist B
U015587 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on, a communication error between the combination meter assembly and the forward recognition camera is detected for approximately 50 seconds or more. CAN communication system Road Sign Assist B

PROCEDURE

1.CHECK FOR DTCs

Pre-procedure1

a.

Clear the DTCs.

Body Electrical > Road Sign Assist > Clear DTCs
50002 431

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



Procedure1

c.

Check for DTCs.

Body Electrical > Road Sign Assist > Trouble Codes
50001 431
Result:
Result Proceed to
CAN DTCs are not output A
CAN DTCs are output B



Post-procedure1

d.

None



A

B