Home › Vehicle Interior › METER / GAUGE / DISPLAY › HEADUP DISPLAY SYSTEM
RM38G0E _58 Vehicle Interior _100611 METER / GAUGE / DISPLAY _0469279 HEADUP DISPLAY SYSTEM W

METER / GAUGE / DISPLAY  HEADUP DISPLAY SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE HEADUP DISPLAY SYSTEM


a.

Customizing with the GTS

i.

Select the setting by referring to the table below.

NOTICE:

Be sure to record the current value before customizing.


Display
Tester Display Description Default Setting ECU
Projection Adjustment (Keystone) Headup display image calibration (keystone calibration) Default $03:Narrow Top (+3),$02:Narrow Top (+2),$01:Narrow Top (+1),$00:Default,$FF:Narrow Bottom (-1),$FE:Narrow Bottom (-2),$FD:Narrow Bottom (-3) Meter mirror sub-assembly
Projection Adjustment (Distortion) Headup display image calibration (distortion calibration) Default $03:Convex (+3),$02:Convex (+2),$01:Convex (+1),$00:Default,$FF:Concave (-1),$FE:Concave (-2),$FD:Concave (-3) Meter mirror sub-assembly
Master Caution Display Function Master caution display setting for headup display ON $00:OFF,$01:ON Meter mirror sub-assembly
Seat Switch Link Function Power seat switch link setting for headup display image position ON $00:OFF,$01:ON Meter mirror sub-assembly
ECO Drive Indicator Zone Display Function Function to change the ECO drive indicator zone display ON $00:OFF,$01:ON Meter mirror sub-assembly
Projection Adjustment (Tilt) Headup display image calibration (Tilt calibration) Default $05:Clockwise (+5),$04:Clockwise (+4),$03:Clockwise (+3),$02:Clockwise (+2),$01:Clockwise (+1),$00:Default,$FF:Anti-Clockwise (-1),$FE:Anti-Clockwise (-2),$FD:A**cut** Meter mirror sub-assembly
50006 14
HINT:
·

Depending on the specifications of the vehicle, some items may not be displayed.

·

Projection Adjustment (Tilt) **cut**:nti-Clockwise (-3),$FC:Anti-Clockwise (-4),$FB:Anti-Clockwise (-5)





b.

Customizing with the combination meter

i.

Select the setting tab and perform the customize setting from the combination meter screen.

Combination Meter Assembly Display Detail Description Default Setting ECU
HUD Brightness / Position Brightness Display brightness setting for headup display. Illumination adjustment bar: Has 11 steps. Default is 7th from low side. Adjust the setting using the arrow keys on the steering pad switch according to the explanation displayed on the combination meter Meter mirror sub-assembly
Position Display position setting for headup display - Adjust the setting using the arrow keys on the steering pad switch according to the explanation displayed on the combination meter Meter mirror sub-assembly
HUD Driving Support Tachometer Settings Tachometer display setting for headup display Tachometer Blank/Eco Indicator/Tachometer Meter mirror sub-assembly
Navigation Navigation display setting for headup display On On/Off Meter mirror sub-assembly
Driving Assist Driving assist display setting for headup display On On/Off Meter mirror sub-assembly
Compass Compass display setting for headup display On On/Off Meter mirror sub-assembly
Audio Audio information display setting for headup display On On/Off Meter mirror sub-assembly
HUD Rotation - Headup display image calibration (rotation calibration) - Adjust the setting using the arrow keys on the steering pad switch according to the explanation displayed on the combination meter Meter mirror sub-assembly

HINT:

Depending on the specifications of the vehicle, some items may not be displayed.