Home › Vehicle Interior › METER / GAUGE / DISPLAY › HEADUP DISPLAY SYSTEM
RM38G0E _58 Vehicle Interior _100611 METER / GAUGE / DISPLAY _0469279 HEADUP DISPLAY SYSTEM D

METER / GAUGE / DISPLAY  HEADUP DISPLAY SYSTEM  UTILITY  


MIRROR POSITION INITIALIZATION


HINT:

Use this procedure to return the display of the headup display to its initial position.


a.

Using the GTS, enter the following menus.

Body Electrical > Head Up Display > Utility
Tester Display
Mirror Position Reset
50005 408 8001

b.

Perform the procedure displayed.



ALL READINESS


HINT:
·

With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS.

·

You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.



a.

Clear the DTCs even if no DTCs are stored.

Body Electrical > Head Up Display > Clear DTCs
50002 408

b.

Turn the ignition switch off and wait for 2 minutes or more.


c.

Turn the ignition switch to ON.


d.

Perform the DTC judgment driving pattern to run the DTC judgment.


e.

Enter the following menus: Body Electrical / Head Up Display / Utility / All Readiness.

Body Electrical > Head Up Display > Utility
Tester Display
All Readiness
50005 408 20

f.

Input the DTC to be confirmed.


g.

Check the DTC judgment result.

GTS Display Description

If the judgment result shows Incomplete or N/A, perform the DTC confirmation driving pattern again.

Normal
·

DTC judgment completed

·

System normal


Abnormal
·

DTC judgment completed

·

System abnormal


Incomplete
·

DTC judgment not completed

·

Perform the driving pattern


N/A
·

Unable to perform DTC judgment

·

Number of DTCs which do not fulfill DTC preconditions has reached ECU memory limit

·

Perform the driving pattern




h.

Turn the ignition switch off.