CHECK NO. 2 SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)
| *a | Component without harness connected (No. 2 Skid Control ECU (Brake Actuator Assembly)) |
- | - |
Disconnect the B20 No. 2 skid control ECU (brake actuator assembly) connectors.
Measure the voltage and resistance according to the value (s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| B20-14 (+BS) - Body ground | Parking brake motor (parking brake actuator assembly) power supply | Always | 11 to 14 V |
| B20-45 (IG1) - Body ground | IG power supply | Ignition switch ON | 11 to 14 V |
| B20-1 (GND1) - Body ground | Ground | Always | Below 1 Ω |
| B20-13 (MRR+) | Parking brake motor RH (parking brake actuator assembly RH) (+) | - | - |
| B20-12 (MRR-) | Parking brake motor RH (parking brake actuator assembly RH) (-) | - | - |
| B20-3 (MRL+) | Parking brake motor LH (parking brake actuator assembly LH) (+) | - | - |
| B20-2 (MRL-) | Parking brake motor LH (parking brake actuator assembly LH) (-) | - | - |
| B20-36 (SWI1) | Electric parking brake switch assembly | - | - |
| B20-31 (SWO1) | Electric parking brake switch assembly | - | - |
| B20-41 (SWI2) | Electric parking brake switch assembly | - | - |
| B20-39 (SWO2) | Electric parking brake switch assembly | - | - |
| B20-27 (CANH) | CAN communication line (H) | - | - |
| B20-43 (CANL) | CAN communication line (L) | - | - |
| B20-16 (CA2H) | CAN communication line 2 (H) | - | - |
| B20-17 (CA2L) | CAN communication line 2 (L) | - | - |