Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM
RM38G0E _54 Brake _100463 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0469467 ELECTRONICALLY CONTROLLED BRAKE SYSTEM D

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM  DIAGNOSIS SYSTEM  


ABS, VSC, BRAKE HOLD, ELECTRONICALLY CONTROLLED BRAKE SYSTEM DTC


a.

If the skid control ECU detects a malfunction, the ABS warning light, brake system warning light (red indicator), brake system warning light (yellow indicator) and slip indicator light will come on in order to warn the driver. Also, if the vehicle is under the following conditions and the brake hold switch (electric parking brake switch assembly) is turned on, the brake hold operated indicator light blinks.

Vehicle Conditions:

(a)

The driver door is closed.

(b)

The driver seat belt is fastened.





DTC FOR RELATED SYSTEM MALFUNCTION


a.

When the skid control ECU detects DTCs stored by related systems, it stores DTCs to indicate the malfunctioning system.

DTC for Related System Malfunction
Malfunctioning System Output DTC DTC Storage System/Control Condition
Engine control system DTC U010000
DTC U010087
DTC U010187
DTC U115C00
DTC U115C87
Current and history DTCs are cleared when the system returns to normal.
·

VSC system is disabled

·

Brake hold control operation is prohibited


Automatic transmission system DTC U010100 Current and history DTCs are cleared when the system returns to normal.
·

VSC system is disabled

·

Brake hold control operation is prohibited


Airbag system DTC U015187 Current DTCs are cleared when the system returns to normal. Secondary collision brake control operation is prohibited

HINT:

The above DTCs may be stored in the skid control ECU even if it was never stored as a history DTC or cleared in the system that caused the DTC to be stored.