Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM
RM38G0E _54 Brake _100463 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0469467 ELECTRONICALLY CONTROLLED BRAKE SYSTEM C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM  C055595  Left Front Wheel Speed Sensor Incorrect Component Installed  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Note
C055595 Left Front Wheel Speed Sensor Incorrect Component Installed History of front speed sensor LH being installed incorrectly Front speed sensor LH Brake/EPB Output ECU: No. 2 skid control ECU (brake actuator assembly)

PROCEDURE

1.CHECK CORRESPONDING PART
a.

Check that the correct Part No. is installed for the corresponding part.

Corresponding Part Front Speed Sensor LH

NOTICE:

If it is necessary to remove components in order to check the corresponding part, follow the relevant installation and removal procedures and precautions for those components.



Result:
Result Proceed to
The corresponding part is the correct Part No. A
The corresponding part is not the correct Part No. B



A

2.CLEAR DTC

B

2.CLEAR DTC
a.

Clear the DTCs.

Chassis > Brake/EPB > Clear DTCs
50002 435

b.

Turn the ignition switch off.


Result:
Proceed to
NEXT



NEXT

3.PERFORM ROAD TEST
3.PERFORM ROAD TEST
a.

Perform a road test under the same malfunction conditions recreated based on the Freeze Frame Data or customer problem analysis.


Result:
Proceed to
NEXT



NEXT

4.RECONFIRM DTC
4.RECONFIRM DTC
a.

Check if the same DTC is output.

Chassis > Brake/EPB > Trouble Codes
50001 435

Result:
Result Proceed to
C055595 is not output A
C055595 is output B



A

B