Home › Engine / Hybrid System › 1GR-FE (ENGINE MECHANICAL) › DRIVE BELT
RM38G0E _51 Engine / Hybrid System _101207 1GR-FE ENGINE MECHANICAL _0469481 DRIVE BELT G

1GR-FE ENGINE MECHANICAL  DRIVE BELT  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:
A343690

To prevent injury due to contact with an operating fan and generator V-belt or cooling fan, keep your hands and clothing away from the fan and generator V-belt and cooling fans when working in the engine compartment with the engine running.


PROCEDURE

Hide 16361A 1.INSPECT FAN AND GENERATOR V BELT

a.
A139581

Check the belt for wear, cracks or other signs of damage.

If any of the following defects is found, replace the fan and generator V belt.

·

The fan and generator V belt is cracked.

·

The fan and generator V belt is worn out to the extent that the cords are exposed.

·

The fan and generator V belt has chunks missing from the ribs.



b.
A139582C01
0.563,1.302 0.75,1.5 0.188,0.198 10 false *a 2.281,1.344 2.594,1.5 0.313,0.156 10 false *b
*a Correct
*b Incorrect


Check that the fan and generator V belt fits properly in the ribbed grooves.

HINT:

Check with your hand to confirm that the fan and generator V belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the fan and generator V belt. Install a new fan and generator V belt correctly.



Hide 16620 2.INSPECT V-RIBBED BELT TENSIONER ASSEMBLY

a.

Turn the V-ribbed belt tensioner clockwise and counterclockwise. Check that the tensioner moves smoothly.

If a malfunction exists, replace the V-ribbed belt tensioner assembly.