8121C 1.INSPECT FOG LIGHT LED (w/o Cornering Light, for LH Side)
Check the illumination.
| *a | Component without harness connected (Fog Light LED) |
Apply battery voltage to the fog light LED and check that the light illuminates.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(A1)Location & Routingewd_type=routing;type=c;code=A1 Click Connector(A1)Engine Compartment>No. 4 Engine Room Wire / Switch Wire>Fog Light Unit LHewd_type=component;type=c;code=A1;pinno=2,1 |
|
| Battery positive (+) - Terminal A1-2(B) | Fog light LED illuminates |
| Battery negative (-) - Terminal A1-1(E) | |
If the result is not as specified, replace the fog light LED.
8121C 2.INSPECT FOG LIGHT LED (w/o Cornering Light, for RH Side)
Check the illumination.
| *a | Component without harness connected (Fog Light LED) |
Apply battery voltage to the fog light LED and check that the light illuminates.
| Tester Connection | Specified Condition |
|---|---|
Click Location & Routing(A2)Location & Routingewd_type=routing;type=c;code=A2 Click Connector(A2)Engine Compartment>No. 4 Engine Room Wire / Switch Wire>Fog Light Unit RHewd_type=component;type=c;code=A2;pinno=2,1 |
|
| Battery positive (+) -Terminal A2-2(B) | Fog light LED illuminates |
| Battery negative (-) - Terminal A2-1(E) | |
If the result is not as specified, replace the fog light LED.
8121C 3.INSPECT FOG LIGHT LED (w/ Cornering Light, for LH Side)
Check the illumination.
| *a | Component without harness connected (Fog Light LED) |
Apply battery voltage to the fog light LED and check that the light illuminates.
| Tester Connection | Specified Condition |
|---|---|
| Battery positive (+) - Terminal 2 | Fog light LED illuminates |
| Battery negative (-) - Terminal 1 |
If the result is not as specified, replace the fog light LED.
8121C 4.INSPECT FOG LIGHT LED (w/ Cornering Light, for RH Side)
Check the illumination.
| *a | Component without harness connected (Fog Light LED) |
Apply battery voltage to the fog light LED and check that the light illuminates.
| Tester Connection | Specified Condition |
|---|---|
| Battery positive (+) -Terminal 2 | Fog light LED illuminates |
| Battery negative (-) - Terminal 1 |
If the result is not as specified, replace the fog light LED.